FountainHead Alloys
FountainHead Alloys
Opera House, Mumbai, Maharashtra
GST No. 27AKOPC9787G1ZI
TrustSEAL Verified
View Mobile No.
SEND EMAIL

Nimonic Products

We are a leading Manufacturer of nimonic alloy 105 - round bar / sheet / pipe, nimonic 80a uns n07080 alloy 80a astm b637 - round bar, nimonic 90 uns n07090 ams 5829 din 2.4632 - wire, nimonic 263 uns n07263 ams 5886 din 2.4650 - round bar, nimonic 90 uns n07090 ams 5829 din 2.4632 - sheet and nimonic 90 uns n07090 ams 5829 din 2.4632 - round bar from Mumbai, India.

Nimonic Alloy 105 - Round Bar / Sheet / Pipe

Nimonic Alloy 105 - Round Bar / Sheet / Pipe
  • Nimonic Alloy 105 - Round Bar / Sheet / Pipe
Get Best Quote
Approx. Price: Rs 650 / KgGet Latest Price

Product Details:

GradeASTM C565
Size0.5 to 500mm
Unit Length3 - 6 Meter
MaterialNimonic
BrandFHA
StandardASTM C565
ColorBlue
Surface FinishingSmooth Finishing
UNSN13021
MSRR7017 / 7018
Din2.4634

Introduction

Nimonic 105 (W. Nr. 2.4634) is a wrought nickel-cobalt-chromium-base alloy strengthened by additions of molybdenum, aluminum and titanium. It has been developed for service up to 950°C, and combines the high strength of the age-hardening nickel-base alloys with good creep resistance. Nimonic alloy 105 is produced by high frequency melting in air followed by casting in air, or, for more critical applications the alloy is produced by vacuum melting and electroslag refining. The alloy is used for turbine blades, discs, forgings, ring sections, bolts and fasteners.

Ni 54.0, Co 20.0, Cr 15.0, Mo 5.0, Al 4.7, Ti 1.3 An age-hardenable superalloy with increased aluminum for improved oxidation-resistance and strength, and high creep-rupture properties up to around 1740°F (950°C). Available as bar and extruded section.

Nimonic 105 is a nickel-cobalt-chromium alloy. The following datasheet provides an overview of Nimonic 105.

Chemical Composition

The chemical composition of Nimonic 105 is outlined in the following table.

ElementContent (%)
Nickel, Ni51
Cobalt, Co18-22
Chromium, Cr14-15.7
Molybdenum, Mo4.50-5.50
Aluminum, Al4.50-4.90
Iron, Fe 1
Manganese, Mn 1
Silicon, Si 1
Titanium, Ti0.90-1.50
Copper, Cu0.20
Zirconium, Zr 0.15
Carbon, C 0.12
Sulfur, S 0.010
Boron, B0.0030-0.010
Physical Properties

The following table shows the physical properties of Nimonic 105.

PropertiesMetricImperial
Density8.01 g/cm³0.289 lb/in³
Melting point1327°C2420°F
Mechanical Properties

The mechanical properties of Nimonic 105 are displayed in the following table.

PropertiesMetricImperial
Tensile strength (precipitation hardened, value at room temperature)1150 MPa167000 psi
Yield strength (precipitation hardened, value at room temperature, @strain 0.200%)770 MPa112000 psi
Elongation at break (precipitation hardened)25%25%
Thermal Properties

The thermal properties of Nimonic 105 are given in the following table.

PropertiesMetricImperial
Thermal expansion co-efficient (@20-100°C/68-212°F)12.2 µm/m°C6.78 µin/in°F
Thermal conductivity10.89 W/mK75.58 BTU in/hr.ft².°F
Annealing

Nimonic 105 can be solution heat treated at 1149°C (2100°F) and then cooled in air.

Cold Working

Standard tooling methods are used for cold working Nimonic 105. Usage of plain carbon steels is not recommended as they may produce galling. Galling can be reduced by the usage of soft die materials and heavy duty lubricants.

Specifications

BS HR3
UNS N13021
DIN 2.4634
ASTM C565
WS 2.4634
MSRR 7017
MSRR 7018
Nimonic 105

Request
Callback
Yes! I am Interested

Nimonic 80A UNS N07080 Alloy 80A ASTM B637 - Round Bar

Nimonic 80A UNS N07080 Alloy 80A ASTM B637 - Round Bar
  • Nimonic 80A UNS N07080 Alloy 80A ASTM B637 - Round Bar
Get Best Quote
Approx. Price: Rs 4,500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
BrandIMPORTED
UsageConstruction , Manufacturing, Household Repair
Size5 TO 500MM DIA
Single Piece Length>36 meter, 3 meter, 18 meter, 36 meter, 6 meter
Black4000

Introduction

Nimonic 80A alloy is a nickel-chromium alloy that is strengthened by the additions of titanium and aluminum. It has high tensile and creep-rupture properties at temperatures up to 815°C (1500°F).

The following datasheet will provide an overview of nimonic 80A alloy.

Chemical Composition

The chemical composition of nimonic 80A alloy is outlined in the following table.

ElementContent (%)
Chromium, Cr18-21
Iron, Fe3
Titanium, Ti1.8-2.7
Aluminum, Al1-1.8
Silicon, Si1
Manganese, Mn1
Copper, Cu0.2
Cobalt, Co0.2
Carbon, C0.1
Phosphorus, P0.045
Boron, B0.008
Nickel, NiBalance
Physical Properties

The following table shows the physical properties of nimonic 80A alloy.

PropertiesMetricImperial
Density8.19 g/cm30.296 lb/in3
Melting point1320-1365°C2410-2489°F
Mechanical Properties

The mechanical properties of nimonic 80A alloy are displayed in the following table.

PropertiesMetricImperial
Tensile strength (Precipitation hardened)1250 MPa181000 psi
Yield strength (Precipitation hardened)780 MPa113000 psi
Elongation at break (Precipitation hardened)30%30%
Thermal Properties

The thermal properties of nimonic 80A alloy are given in the following table.

PropertiesMetricImperial
Thermal expansion co-efficient (@20-100°C/68-212°F)12.7 µm/m°C7.06 µin/in°F
Thermal conductivity11.2 W/mK77.7 BTU.in/hrft².°F

Request
Callback


Additional Information:

  • Item Code: Nimonic_80A_UNSN07080_Alloy80A_ASTMB637_RoundBar
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Nimonic 90 UNS N07090 AMS 5829 DIN 2.4632 - Wire

Nimonic 90 UNS N07090 AMS 5829 DIN 2.4632 - Wire
  • Nimonic 90 UNS N07090 AMS 5829 DIN 2.4632 - Wire
Get Best Quote
Approx. Price: Rs 4,500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Blue6000
Wire Size5 TO 500MM DIA
ColorBlack , Blue, Green
BrandFinolex, Anchor, Havells, Polycab
Flame RetardantYes

Introduction

Super alloys have good creep and oxidation resistance, and can be formed in different shapes. They contain a number of elements in a variety of combinations to achieve the desired result, and can function at very high temperatures and mechanical stress. They are classified into three groups such as nickel-based, iron-based and cobalt-based alloys.

Nimonic 90™ is a nickel-chromium-cobalt alloy which can be strengthened by adding aluminum and titanium.

Chemical Composition

The following table shows the chemical composition of Nimonic 90™.

ElementContent (%)
Iron, Fe58.5
Chromium, Cr19.5
Cobalt, Co18
Titanium, Ti2.5
Aluminum, Al1.5
Physical Properties

The physical properties of Nimonic 90™ are outlined in the following table.

PropertiesMetricImperial
Density8.18 g/cm³0.296 lb/in³
Melting point1344°C2450°F
Thermal Properties

The thermal properties of Nimonic 90™ are given in the following table.

PropertiesMetricImperial
Thermal expansion co-efficient (@ 20-100°C/68-212°F)12.7 µm/m°C7.1 µin/in°F
Thermal conductivity (@ 20°C/68°F)11.47 W/mK80.46 BTU in/hr.ft².°F

Request
Callback


Additional Information:

  • Item Code: Nimonic_90_UNSN07090_AMS5829_Wire
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Par Request..
Yes! I am Interested

Nimonic 263 UNS N07263 AMS 5886 DIN 2.4650 - Round Bar

Nimonic 263 UNS N07263 AMS 5886  DIN 2.4650 - Round Bar
  • Nimonic 263 UNS N07263 AMS 5886  DIN 2.4650 - Round Bar
Get Best Quote
Approx. Price: Rs 4,500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Single Piece Length18 meter, 6 meter, 36 meter, >36 meter, 3 meter
Size5 TO 500MM DIA
BrandIMPORTED
UsageConstruction , Manufacturing, Household Repair
Blue6000

Introduction

Super alloys are also called high performance alloys. They contain a number of elements in a variety of combinations to reach the desired result. These alloys can function in environments with high temperatures and severe mechanical stress, and also in cases where high surface stability is needed. Super alloys have good creep and oxidation resistance.

Strengthening of super alloys is performed by work hardening, solid-solution hardening, and precipitation hardening methods.

Nimonic Alloy 263™ is a British nickel-chromium-cobalt-molybdenum alloy specially meant for use in high temperature and high strength applications. This alloy can be precipitation-hardened.

The following datasheet will provide more details about Nimonic Alloy 263™.

Chemical Composition

The following table shows the chemical composition of Nimonic Alloy 263™.

ElementContent (%)
Nickel, Ni49
Cobalt, Co19-21
Chromium, Cr19-21
Molybdenum, Mo5.60-6.10
Titanium, Ti1.90-2.40
Iron, Fe0.70
Manganese, Mn0.60
Aluminum, Al0.60
Silicon, Si0.40
Copper, Cu0.20
Carbon, C0.040 - 0.080
Boron, B0.0050
Sulfur, S0.0070
Physical Properties

The physical properties of Nimonic Alloy 263™ are outlined in the following table.

PropertiesMetricImperial
Density8.36 g/cm³0.302 lb/in³
Melting point1300-1355°C2370-2471°F
Mechanical Properties

The mechanical properties of Nimonic Alloy 263™ are provided below.

PropertiesMetricImperial
Tensile strength (precipitation hardened, value at room temperature)940 MPa136000 psi
Yield strength (@strain 0.200%, precipitation hardened, value at room temperature)550 MPa79800 psi
Elongation at break (precipitation hardened)39%39%
Request
Callback


Additional Information:

  • Item Code: Nimonic_263_UNSN07263_AMS5886_DIN24650_RoundBar
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Nimonic 90 UNS N07090 AMS 5829 DIN 2.4632 - Sheet

Nimonic 90 UNS N07090 AMS 5829 DIN 2.4632 - Sheet
  • Nimonic 90 UNS N07090 AMS 5829 DIN 2.4632 - Sheet
Get Best Quote
Approx. Price: Rs 4,500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity520 Kilogram
Yellow3500
Thickness0-1 mm, 1-2 mm, 2-3 mm, 3-4 mm , 4-5 mm, >5mm
Sheet Size (feet X feet)5 TO 500MM
Steel GradeSS316 L, SS304 L, SS409 L, SS200
Surface TreatmentCoated, Painted, Hot Rolled, Cold Rolled

Introduction

Super alloys have good creep and oxidation resistance, and can be formed in different shapes. They contain a number of elements in a variety of combinations to achieve the desired result, and can function at very high temperatures and mechanical stress. They are classified into three groups such as nickel-based, iron-based and cobalt-based alloys.

Nimonic 90™ is a nickel-chromium-cobalt alloy which can be strengthened by adding aluminum and titanium.

Chemical Composition

The following table shows the chemical composition of Nimonic 90™.

ElementContent (%)
Iron, Fe58.5
Chromium, Cr19.5
Cobalt, Co18
Titanium, Ti2.5
Aluminum, Al1.5
Physical Properties

The physical properties of Nimonic 90™ are outlined in the following table.

PropertiesMetricImperial
Density8.18 g/cm³0.296 lb/in³
Melting point1344°C2450°F
Request
Callback


Additional Information:

  • Item Code: Nimonic_90_UNSN07090_AMS5829_Sheet
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Nimonic 90 UNS N07090 AMS 5829 DIN 2.4632 - Round Bar

Nimonic 90 UNS N07090 AMS 5829 DIN 2.4632 - Round Bar
  • Nimonic 90 UNS N07090 AMS 5829 DIN 2.4632 - Round Bar
Get Best Quote
Approx. Price: Rs 4,500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Single Piece Length18 meter, 6 meter, 36 meter, >36 meter, 3 meter
Size25 - 600mm Dia
BrandIMPORTED
UsageConstruction , Manufacturing, Household Repair
Blue4000

Introduction

Super alloys have good creep and oxidation resistance, and can be formed in different shapes. They contain a number of elements in a variety of combinations to achieve the desired result, and can function at very high temperatures and mechanical stress. They are classified into three groups such as nickel-based, iron-based and cobalt-based alloys.

Nimonic 90™ is a nickel-chromium-cobalt alloy which can be strengthened by adding aluminum and titanium.

Chemical Composition

The following table shows the chemical composition of Nimonic 90™.

ElementContent (%)
Iron, Fe58.5
Chromium, Cr19.5
Cobalt, Co18
Titanium, Ti2.5
Aluminum, Al1.5
Physical Properties

The physical properties of Nimonic 90™ are outlined in the following table.

PropertiesMetricImperial
Density8.18 g/cm³0.296 lb/in³
Melting point1344°C2450°F
Request
Callback


Additional Information:

  • Item Code: Nimonic_90_UNSN07090_AMS5829_DIN24632_RoundBar
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Nimonic 80A / UNS N07080 / Alloy 80A / ASTM B637 - Wire

Nimonic 80A / UNS N07080 / Alloy 80A / ASTM B637 - Wire
  • Nimonic 80A / UNS N07080 / Alloy 80A / ASTM B637 - Wire
Get Best Quote
Approx. Price: Rs 1,590 / KgGet Latest Price

Product Details:

Minimum Order Quantity50 Kg
Length50 TO 500MM
Green5000
TypeNickel Wire

Introduction

Nimonic 80A alloy is a nickel-chromium alloy that is strengthened by the additions of titanium and aluminum. It has high tensile and creep-rupture properties at temperatures up to 815°C (1500°F).

The following datasheet will provide an overview of nimonic 80A alloy.

Chemical Composition

The chemical composition of nimonic 80A alloy is outlined in the following table.

ElementContent (%)
Chromium, Cr18-21
Iron, Fe3
Titanium, Ti1.8-2.7
Aluminum, Al1-1.8
Silicon, Si1
Manganese, Mn1
Copper, Cu0.2
Cobalt, Co0.2
Carbon, C0.1
Phosphorus, P0.045
Boron, B0.008
Nickel, NiBalance
Physical Properties

The following table shows the physical properties of nimonic 80A alloy.

PropertiesMetricImperial
Density8.19 g/cm30.296 lb/in3
Melting point1320-1365°C2410-2489°F
Mechanical Properties

The mechanical properties of nimonic 80A alloy are displayed in the following table.

PropertiesMetricImperial
Tensile strength (Precipitation hardened)1250 MPa181000 psi
Yield strength (Precipitation hardened)780 MPa113000 psi
Elongation at break (Precipitation hardened)30%30%
Thermal Properties

The thermal properties of nimonic 80A alloy are given in the following table.

PropertiesMetricImperial
Thermal expansion co-efficient (@20-100°C/68-212°F)12.7 µm/m°C7.06 µin/in°F
Thermal conductivity11.2 W/mK77.7 BTU.in/hrft².°F

Request
Callback


Additional Information:

  • Item Code: Nimonic_80A_UNSN07080_Alloy80A_ASTMB637_Wire
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Nimonic 263 UNS N07263 AMS 5886 DIN 2.4650 - Forged Block

Nimonic 263 UNS N07263 AMS 5886 DIN 2.4650 - Forged Block
  • Nimonic 263 UNS N07263 AMS 5886 DIN 2.4650 - Forged Block
Get Best Quote
Approx. Price: Rs 4,500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Size5 TO 500MM
BrandIMPORTED
Black5000

Introduction

Super alloys are also called high performance alloys. They contain a number of elements in a variety of combinations to reach the desired result. These alloys can function in environments with high temperatures and severe mechanical stress, and also in cases where high surface stability is needed. Super alloys have good creep and oxidation resistance.

Strengthening of super alloys is performed by work hardening, solid-solution hardening, and precipitation hardening methods.

Nimonic Alloy 263™ is a British nickel-chromium-cobalt-molybdenum alloy specially meant for use in high temperature and high strength applications. This alloy can be precipitation-hardened.

The following datasheet will provide more details about Nimonic Alloy 263™.

Chemical Composition

The following table shows the chemical composition of Nimonic Alloy 263™.

ElementContent (%)
Nickel, Ni49
Cobalt, Co19-21
Chromium, Cr19-21
Molybdenum, Mo5.60-6.10
Titanium, Ti1.90-2.40
Iron, Fe0.70
Manganese, Mn0.60
Aluminum, Al0.60
Silicon, Si0.40
Copper, Cu0.20
Carbon, C0.040 - 0.080
Boron, B0.0050
Sulfur, S0.0070
Physical Properties

The physical properties of Nimonic Alloy 263™ are outlined in the following table.

PropertiesMetricImperial
Density8.36 g/cm³0.302 lb/in³
Melting point1300-1355°C2370-2471°F
Mechanical Properties

The mechanical properties of Nimonic Alloy 263™ are provided below.

PropertiesMetricImperial
Tensile strength (precipitation hardened, value at room temperature)940 MPa136000 psi
Yield strength (@strain 0.200%, precipitation hardened, value at room temperature)550 MPa79800 psi
Elongation at break (precipitation hardened)39%39%
Request
Callback


Additional Information:

  • Item Code: Nimonic263_UNSN07263_AMS5886_ForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Nimonic 263 UNS N07263 AMS 5886 Alloy 263 DIN 2.4650 - Sheet

Nimonic 263 UNS N07263 AMS 5886 Alloy 263 DIN 2.4650 - Sheet
  • Nimonic 263 UNS N07263 AMS 5886 Alloy 263 DIN 2.4650 - Sheet
Get Best Quote
Approx. Price: Rs 4,500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
GradeHastelloy C263
TypePlate
Thickness0.1mm-200mm

Introduction

Super alloys are also called high performance alloys. They contain a number of elements in a variety of combinations to reach the desired result. These alloys can function in environments with high temperatures and severe mechanical stress, and also in cases where high surface stability is needed. Super alloys have good creep and oxidation resistance.

Strengthening of super alloys is performed by work hardening, solid-solution hardening, and precipitation hardening methods.

Nimonic Alloy 263™ is a British nickel-chromium-cobalt-molybdenum alloy specially meant for use in high temperature and high strength applications. This alloy can be precipitation-hardened.

The following datasheet will provide more details about Nimonic Alloy 263™.

Chemical Composition

The following table shows the chemical composition of Nimonic Alloy 263™.

ElementContent (%)
Nickel, Ni49
Cobalt, Co19-21
Chromium, Cr19-21
Molybdenum, Mo5.60-6.10
Titanium, Ti1.90-2.40
Iron, Fe0.70
Manganese, Mn0.60
Aluminum, Al0.60
Silicon, Si0.40
Copper, Cu0.20
Carbon, C0.040 - 0.080
Boron, B0.0050
Sulfur, S0.0070
Physical Properties

The physical properties of Nimonic Alloy 263™ are outlined in the following table.

PropertiesMetricImperial
Density8.36 g/cm³0.302 lb/in³
Melting point1300-1355°C2370-2471°F
Mechanical Properties

The mechanical properties of Nimonic Alloy 263™ are provided below.

PropertiesMetricImperial
Tensile strength (precipitation hardened, value at room temperature)940 MPa136000 psi
Yield strength (@strain 0.200%, precipitation hardened, value at room temperature)550 MPa79800 psi
Elongation at break (precipitation hardened)39%39%
Request
Callback


Additional Information:

  • Item Code: Nimonic_263_UNSN07263_AMS5886_Alloy263_Sheet
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Nimonic 80A UNS N07080 Alloy 80A ASTM B637 - Sheet

Nimonic 80A UNS N07080 Alloy 80A ASTM B637 - Sheet
  • Nimonic 80A UNS N07080 Alloy 80A ASTM B637 - Sheet
Get Best Quote
Approx. Price: Rs 4,500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
LengthCustomized
Special Use High-strength Steel Plate
ShapeFlat Steel Plate

Introduction

Nimonic 80A alloy is a nickel-chromium alloy that is strengthened by the additions of titanium and aluminum. It has high tensile and creep-rupture properties at temperatures up to 815°C (1500°F).

The following datasheet will provide an overview of nimonic 80A alloy.

Chemical Composition

The chemical composition of nimonic 80A alloy is outlined in the following table.

ElementContent (%)
Chromium, Cr18-21
Iron, Fe3
Titanium, Ti1.8-2.7
Aluminum, Al1-1.8
Silicon, Si1
Manganese, Mn1
Copper, Cu0.2
Cobalt, Co0.2
Carbon, C0.1
Phosphorus, P0.045
Boron, B0.008
Nickel, NiBalance
Physical Properties

The following table shows the physical properties of nimonic 80A alloy.

PropertiesMetricImperial
Density8.19 g/cm30.296 lb/in3
Melting point1320-1365°C2410-2489°F
Mechanical Properties

The mechanical properties of nimonic 80A alloy are displayed in the following table.

PropertiesMetricImperial
Tensile strength (Precipitation hardened)1250 MPa181000 psi
Yield strength (Precipitation hardened)780 MPa113000 psi
Elongation at break (Precipitation hardened)30%30%
Thermal Properties

The thermal properties of nimonic 80A alloy are given in the following table.

PropertiesMetricImperial
Thermal expansion co-efficient (@20-100°C/68-212°F)12.7 µm/m°C7.06 µin/in°F
Thermal conductivity11.2 W/mK77.7 BTU.in/hrft².°F

Request
Callback


Additional Information:

  • Item Code: NNimonic_80A_UNSN07080_Alloy80A_ASTMB637_Sheet
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Nimonic 80A UNS N07080 Alloy 80A ASTM B637 - Forged Block

Nimonic 80A UNS N07080 Alloy 80A ASTM B637 - Forged Block
  • Nimonic 80A UNS N07080 Alloy 80A ASTM B637 - Forged Block
Get Best Quote
Approx. Price: Rs 4,500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Size5 TO 500MM DIA
BrandIMPORTED
Green4500

Introduction

Nimonic 80A alloy is a nickel-chromium alloy that is strengthened by the additions of titanium and aluminum. It has high tensile and creep-rupture properties at temperatures up to 815°C (1500°F).

The following datasheet will provide an overview of nimonic 80A alloy.

Chemical Composition

The chemical composition of nimonic 80A alloy is outlined in the following table.

ElementContent (%)
Chromium, Cr18-21
Iron, Fe3
Titanium, Ti1.8-2.7
Aluminum, Al1-1.8
Silicon, Si1
Manganese, Mn1
Copper, Cu0.2
Cobalt, Co0.2
Carbon, C0.1
Phosphorus, P0.045
Boron, B0.008
Nickel, NiBalance
Physical Properties

The following table shows the physical properties of nimonic 80A alloy.

PropertiesMetricImperial
Density8.19 g/cm30.296 lb/in3
Melting point1320-1365°C2410-2489°F
Mechanical Properties

The mechanical properties of nimonic 80A alloy are displayed in the following table.

PropertiesMetricImperial
Tensile strength (Precipitation hardened)1250 MPa181000 psi
Yield strength (Precipitation hardened)780 MPa113000 psi
Elongation at break (Precipitation hardened)30%30%
Thermal Properties

The thermal properties of nimonic 80A alloy are given in the following table.

PropertiesMetricImperial
Thermal expansion co-efficient (@20-100°C/68-212°F)12.7 µm/m°C7.06 µin/in°F
Thermal conductivity11.2 W/mK77.7 BTU.in/hrft².°F

Request
Callback


Additional Information:

  • Item Code: Nimonic_80A_UNSN07080_Alloy80A_ForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Nimonic 263 UNS N07263 AMS 5886 Alloy 263 DIN 2.4650 - Wire

Nimonic 263 UNS N07263 AMS 5886 Alloy 263 DIN 2.4650 - Wire
  • Nimonic 263 UNS N07263 AMS 5886 Alloy 263 DIN 2.4650 - Wire
Get Best Quote
Approx. Price: Rs 4,500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
GradeNickel-chromium-cobalt alloy
Surface Bright
ApplicationGas Well Components

Introduction

Super alloys are also called high performance alloys. They contain a number of elements in a variety of combinations to reach the desired result. These alloys can function in environments with high temperatures and severe mechanical stress, and also in cases where high surface stability is needed. Super alloys have good creep and oxidation resistance.

Strengthening of super alloys is performed by work hardening, solid-solution hardening, and precipitation hardening methods.

Nimonic Alloy 263™ is a British nickel-chromium-cobalt-molybdenum alloy specially meant for use in high temperature and high strength applications. This alloy can be precipitation-hardened.

The following datasheet will provide more details about Nimonic Alloy 263™.

Chemical Composition

The following table shows the chemical composition of Nimonic Alloy 263™.

ElementContent (%)
Nickel, Ni49
Cobalt, Co19-21
Chromium, Cr19-21
Molybdenum, Mo5.60-6.10
Titanium, Ti1.90-2.40
Iron, Fe0.70
Manganese, Mn0.60
Aluminum, Al0.60
Silicon, Si0.40
Copper, Cu0.20
Carbon, C0.040 - 0.080
Boron, B0.0050
Sulfur, S0.0070
Physical Properties

The physical properties of Nimonic Alloy 263™ are outlined in the following table.

PropertiesMetricImperial
Density8.36 g/cm³0.302 lb/in³
Melting point1300-1355°C2370-2471°F
Mechanical Properties

The mechanical properties of Nimonic Alloy 263™ are provided below.

PropertiesMetricImperial
Tensile strength (precipitation hardened, value at room temperature)940 MPa136000 psi
Yield strength (@strain 0.200%, precipitation hardened, value at room temperature)550 MPa79800 psi
Elongation at break (precipitation hardened)39%39%
Request
Callback


Additional Information:

  • Item Code: NImonic_263_DIN24650_UNSN07263_AMS5886_Alloy263_Wire
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Nimonic 90 / UNS N07090 / Alloy 90 Round Bar

Nimonic 90 / UNS N07090 / Alloy 90 Round Bar
  • Nimonic 90 / UNS N07090 / Alloy 90 Round Bar
Get Best Quote
Approx. Price: Rs 1,190 / KgGet Latest Price

Product Details:

Minimum Order Quantity50 Kg
Material GradeUNS N07090
Single Piece Length6 meter, >36 meter, 36 meter, 3 meter, 18 meter
Size5 to 500mm Dia
BrandEuropean Origin
Dimension3 - 6 Meter
UsageManufacturing, Construction, Household Repair
Red5500

Nimonic 90 UNS N07090 Alloy 90, Wire, Round Bar, Sheet/Plate

 

NIMONIC® alloy 90 (UNS N07090/W. Nr. 2.4632) is a wrought nickel-chromium-cobalt base alloy strengthened by additions of titanium and aluminum. It has been developed as an age-hardenable creepresisting alloy for service at temperatures up to 920°C (1688°F. The alloy is used for turbine blades, discs, forgings, ring sections and hot-working tools.

 

Chemical composition

 

Carbon.......................................................0.13 max. Silicon........................................................1.0 max. Copper........................................................0.2 max. Iron............................................................1.5 max. Manganese...................................................1.0 max. Chromium.....................................................18.0-21.0 Titanium.......................................................2.0-3.0 Aluminum.....................................................1.0-2.0 Cobalt..........................................................15.0-21.0 Boron...........................................................0.02 max. Sulfur ..........................................................0.015 max. Lead.............................................................0.0020 max. Zirconium......................................................0.15 max. Nickel............................................................Balance

Application:Automobile Industry, Construction , Pharmaceutical/Chemical Industry, Oil & Gas Industry

 

Request
Callback


Additional Information:

  • Item Code: Nimonic_90_UNSN07090_Alloy90_Wire_RoundBar_SheetPlate
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Nimonic C263 / UNS N07263 / Alloy C263 Round Bar

Nimonic C263 / UNS N07263 / Alloy C263 Round Bar
  • Nimonic C263 / UNS N07263 / Alloy C263 Round Bar
Get Best Quote
Approx. Price: Rs 1,270 / KgGet Latest Price

Product Details:

Minimum Order Quantity50 Kg
TypeRound Bars, Sheet, Wire
ColorGray
Material GradeNimonic C263
Surface FinishSmooth
UnsUNS N07263
Size5 to 500mm Dia
Single Piece Length3 - 6 Meter
UsageAerospace,Oil & Gas,Marine,Nuclear,Defence,Heavy Engineering
Green6500
BrandFHA

Nimonic C263 UNS N07263 Alloy C263, Wire, Round Bar, Sheet

They contain a number of elements in a variety of combinations to reach the desired result. These alloys can function in environments with high temperatures and severe mechanical stress, and also in cases where high surface stability is needed. Super alloys have good creep and oxidation resistance.

Strengthening of super alloys is performed by work hardening, solid-solution hardening, and precipitation hardening methods.

Nimonic Alloy 263™ is a British nickel-chromium-cobalt-molybdenum alloy specially meant for use in high temperature and high strength applications. This alloy can be precipitation-hardened.

The following datasheet will provide more details about Nimonic Alloy 263™.

Chemical Composition

The following table shows the chemical composition of Nimonic Alloy 263™.

Element

Content (%)

Nickel, Ni

49

Cobalt, Co

19-21

Chromium, Cr

19-21

Molybdenum, Mo

5.60-6.10

Titanium, Ti

1.90-2.40

Iron, Fe

0.70

Manganese, Mn

0.60

Aluminum, Al

0.60

Silicon, Si

0.40

Copper, Cu

0.20

Carbon, C

0.040 - 0.080

Boron, B

0.0050

Sulfur, S

0.0070

Physical Properties

The physical properties of Nimonic Alloy 263™ are outlined in the following table.

Properties

Metric

Imperial

Density

8.36 g/cm³

0.302 lb/in³

Melting point

1300-1355°C

2370-2471°F

Mechanical Properties

The mechanical properties of Nimonic Alloy 263™ are provided below.

Properties

Metric

Imperial

Tensile strength (precipitation hardened, value at room temperature)

940 MPa

136000 psi

Yield strength (@strain 0.200%, precipitation hardened, value at room temperature)

550 MPa

79800 psi

Elongation at break (precipitation hardened)

39%

39%

Request
Callback


Additional Information:

  • Item Code: AlloyC263
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 7 Days
  • Packaging Details: As Per Request.....
Yes! I am Interested

Nimonic 80A UNS N07080 Alloy 80A, Wire, Round Bar, Sheet

Nimonic 80A UNS N07080 Alloy 80A, Wire, Round Bar, Sheet
  • Nimonic 80A UNS N07080 Alloy 80A, Wire, Round Bar, Sheet
Get Best Quote
Approx. Price: Rs 1,270 / KgGet Latest Price

Product Details:

Minimum Order Quantity50 Kg
Single Piece Length3 meter,6 meter,18 meter,36 meter,>36 meter
Size5 TO 500MM DIA
BrandRueopean Origin
UsageManufacturing,Construction,Household Repair
Blue6000

NIMONIC® alloy 80A(UNS N07080/W. Nr. 2.4952 2.4631) is a wrought, age-hardenable nickel-chromium alloy, strengthened by additions of titanium, aluminum and carbon, developed for service at temperatures up to 815°C (1500°F). It is produced by high-frequency melting and casting in air for forms to be extruded. Electroslag refined material is used for forms to be forged. Vacuum refined versions are also available. NIMONIC alloy 80A is currently used for gas turbine components (blades, rings and discs), bolts, nuclear boiler tube supports, die casting inserts and cores, and for automobile exhaust valves.

Chemical Composition

Carbon........................................................0.10 max. Chromium....................................................18.0-21.0 Silicon..........................................................1.0 max Copper..........................................................0.2 max. Iron..............................................................3.0 max. Manganese.....................................................1.0 max. Titanium.........................................................1.8-2.7 Aluminum.......................................................1.0-1.8 Cobalt.............................................................2.0 max. Boron.............................................................0.008 max. Zirconium.........................................................0.15 max. Lead.............................................................0.0025 max. Sulfur ...........................................................0.015 max. Nick................................................................Balance*

Application:Automobile Industry, Construction , Pharmaceutical/Chemical Industry, Oil & Gas Industry

Request
Callback


Additional Information:

  • Item Code: Nimonic_80A_UNSN07080_Alloy80A_Wire_RoundBar_Sheet
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Nimonic 263 UNS N07263 AMS 5886 Alloy 263 DIN 2.4650 - Pipe

Nimonic 263 UNS N07263 AMS 5886 Alloy 263 DIN 2.4650 - Pipe
  • Nimonic 263 UNS N07263 AMS 5886 Alloy 263 DIN 2.4650 - Pipe
Get Best Quote
Approx. Price: Rs 4,500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Unit Length6 m, 24m, 12 m, 18 m
Size2-3, > 4, 0-1, 1-2, 3-4
ApplicationAir Conditioner , Water Heater, Oil Cooler Pipe, Refrigerator
ShapeRectangular, Square, Round, Oval
Black6400

Introduction

Super alloys are also called high performance alloys. They contain a number of elements in a variety of combinations to reach the desired result. These alloys can function in environments with high temperatures and severe mechanical stress, and also in cases where high surface stability is needed. Super alloys have good creep and oxidation resistance.

Strengthening of super alloys is performed by work hardening, solid-solution hardening, and precipitation hardening methods.

Nimonic Alloy 263™ is a British nickel-chromium-cobalt-molybdenum alloy specially meant for use in high temperature and high strength applications. This alloy can be precipitation-hardened.

The following datasheet will provide more details about Nimonic Alloy 263™.

Chemical Composition

The following table shows the chemical composition of Nimonic Alloy 263™.

ElementContent (%)
Nickel, Ni49
Cobalt, Co19-21
Chromium, Cr19-21
Molybdenum, Mo5.60-6.10
Titanium, Ti1.90-2.40
Iron, Fe0.70
Manganese, Mn0.60
Aluminum, Al0.60
Silicon, Si0.40
Copper, Cu0.20
Carbon, C0.040 - 0.080
Boron, B0.0050
Sulfur, S0.0070
Physical Properties

The physical properties of Nimonic Alloy 263™ are outlined in the following table.

PropertiesMetricImperial
Density8.36 g/cm³0.302 lb/in³
Melting point1300-1355°C2370-2471°F
Mechanical Properties

The mechanical properties of Nimonic Alloy 263™ are provided below.

PropertiesMetricImperial
Tensile strength (precipitation hardened, value at room temperature)940 MPa136000 psi
Yield strength (@strain 0.200%, precipitation hardened, value at room temperature)550 MPa79800 psi
Elongation at break (precipitation hardened)39%39%
Request
Callback


Additional Information:

  • Item Code: Nimonic_263_UNSN07263_AMS5886_Alloy263_DIN24650_Pipe
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Nimonic 80A UNS N07080 Alloy 80A ASTM B637 - Pipe

Nimonic 80A UNS N07080 Alloy 80A ASTM B637 - Pipe
  • Nimonic 80A UNS N07080 Alloy 80A ASTM B637 - Pipe
Get Best Quote
Approx. Price: Rs 4,500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Unit Length24m, 6 m, 12 m, 18 m, 3
Size0-1, > 4, 1-2, 2-3, 3-4
ApplicationRefrigerator, Oil Cooler Pipe, Air Conditioner, Water Heater
ShapeRectangular, Square, Round, Oval
Red3600

Introduction

Nimonic 80A alloy is a nickel-chromium alloy that is strengthened by the additions of titanium and aluminum. It has high tensile and creep-rupture properties at temperatures up to 815°C (1500°F).

The following datasheet will provide an overview of nimonic 80A alloy.

Chemical Composition

The chemical composition of nimonic 80A alloy is outlined in the following table.

ElementContent (%)
Chromium, Cr18-21
Iron, Fe3
Titanium, Ti1.8-2.7
Aluminum, Al1-1.8
Silicon, Si1
Manganese, Mn1
Copper, Cu0.2
Cobalt, Co0.2
Carbon, C0.1
Phosphorus, P0.045
Boron, B0.008
Nickel, NiBalance
Physical Properties

The following table shows the physical properties of nimonic 80A alloy.

PropertiesMetricImperial
Density8.19 g/cm30.296 lb/in3
Melting point1320-1365°C2410-2489°F
Mechanical Properties

The mechanical properties of nimonic 80A alloy are displayed in the following table.

 

Usage :Manufacturing, Construction, Household Repair

 

PropertiesMetricImperial
Tensile strength (Precipitation hardened)1250 MPa181000 psi
Yield strength (Precipitation hardened)780 MPa113000 psi
Elongation at break (Precipitation hardened)30%30%
Thermal Properties

The thermal properties of nimonic 80A alloy are given in the following table.

PropertiesMetricImperial
Thermal expansion co-efficient (@20-100°C/68-212°F)12.7 µm/m°C7.06 µin/in°F
Thermal conductivity11.2 W/mK77.7 BTU.in/hrft².°F

Request
Callback


Additional Information:

  • Item Code: Nimonic_80A_UNSN07080_Alloy80A_ASTMB637_Pipe
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Nimonic 90 UNS N07090 AMS 5829 DIN 2.4632 - Pipe

Nimonic 90 UNS N07090 AMS 5829 DIN 2.4632 - Pipe
  • Nimonic 90 UNS N07090 AMS 5829 DIN 2.4632 - Pipe
Get Best Quote
Approx. Price: Rs 4,500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Unit Length6 m, 12 m, 18 m, 24m
Size2-3, > 4, 0-1, 3-4, 1-2
ApplicationWater Heater, Oil Cooler Pipe, Refrigerator, Air Conditioner
ShapeRectangular, Oval, Round, Square
Red4000

Introduction

Super alloys have good creep and oxidation resistance, and can be formed in different shapes. They contain a number of elements in a variety of combinations to achieve the desired result, and can function at very high temperatures and mechanical stress. They are classified into three groups such as nickel-based, iron-based and cobalt-based alloys.

Nimonic 90™ is a nickel-chromium-cobalt alloy which can be strengthened by adding aluminum and titanium.

Chemical Composition

The following table shows the chemical composition of Nimonic 90™.

ElementContent (%)
Iron, Fe58.5
Chromium, Cr19.5
Cobalt, Co18
Titanium, Ti2.5
Aluminum, Al1.5
Physical Properties

The physical properties of Nimonic 90™ are outlined in the following table.

PropertiesMetricImperial
Density8.18 g/cm³0.296 lb/in³
Melting point1344°C2450°F
Request
Callback


Additional Information:

  • Item Code: Nimonic_90_UNSN07090_AMS5829_DIN24632_Pipe
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested
X

Explore More Product



Reach Us
Anil Gupta (Sales Manager)
FountainHead Alloys
B-12A, Flox Chambers, Tata Road No. 1, Opera House
Mumbai - 400004, Maharashtra, India



Call Us


Send E-mailSend SMS