Fountainhead Alloys
Opera House, Mumbai, Maharashtra
GST No. 27AKOPC9787G1ZI
TrustSEAL Verified
Call 0804764305196% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 500 Kg |
| Material | Beryllium Copper |
| Shape | Round |
| Material Grade | C17300 |
| Usage/Application | Construction |
| Brand | FHA |
| Single Piece Length | 6 Meter |
| UNS | C17300 |
| Diameter | 500 mm |
| Standard | DIN 2.1248 |
UNS C17300 beryllium copper alloys are heat treatable, ductile and can be mill hardened. They offer tensile strength of 1380 MPa (200 ksi). These steels are suitable for applications requiring good conductivity, high strength and stiffness.
This article will give an overview of UNS C17300 beryllium copper alloys.
The following table shows the chemical composition of UNS C17300 copper.
| Element | Content (%) |
|---|---|
| Cu | 97.7 |
| Be | 1.9 |
| Co | 0.40 |
The physical properties of UNS C17300 copper are given in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density (during age hardening, 2% max. decrease in length and 6% max. increase in density) | 8.25 g/cm3 | 0.298 lb/in3 |
| Melting point | 866°C | 1590°F |
The mechanical properties of UNS C17300 copper are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Hardness, Rockwell B | 80.0 - 85.0 | 80.0 - 85.0 |
| Tensile strength, ultimate | 515 - 585 MPa | 74700 - 84800 psi |
| Tensile strength, yield | 275 - 345 MPa | 39900 - 50000 psi |
| Elongation at break | 15.0 - 30.0% | 15.0 - 30.0% |
| Modulus of elasticity | 125 - 130 GPa | 18100 - 18900 ksi |
| Poissons ratio | 0.300 | 0.300 |
| Machinability (UNS C36000 (free-cutting brass) = 100%) | 20% | 20% |
| Shear modulus | 50.0 GPa | 7250 ksi |
C17300 copper alloys can be welded using soldering, brazing, gas shielded arc welding, coated metal arc welding, spot welding, seam welding and butt welding. Oxyacetylene welding is not recommended for this type of alloys.
The following are the major applications of UNS C17300 copper:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Shape | Rectangular |
| Grade | Alloy C17200 |
| Beryllium Copper | DIN 2.1247 |
| Material | Beryllium Copper |
| Size | 3 Meter |
| Usage/Application | Construction |
| Thickness | 50 mm |
| UNS | C17200 |
| Finish | Smooth |
UNS C17200 beryllium copper alloys are ductile and produced in mill hardened and heat treatable tempers. These alloys are used for all applications, which require high strength, stiffness and good conductivity. The tensile strength of C17200 copper is over 1380 MPa (200 ksi).
The following datasheet will explain about UNS C17200 beryllium copper alloys.
Chemical Composition:
The following table shows the chemical composition of UNS C17200 copper.
Element | Content (%) |
Cu | 97.9 |
Be | 1.9 |
Co | 0.20 |
Physical Properties:
The physical properties of UNS C17200 copper are given in the following table.
Properties | Metric | Imperial |
Density (during age hardening, 2% max. decrease in length and 6% max. increase in density) | 8.25 g/cm3 | 0.298 lb/in3 |
Melting point | 866°C | 1590°F |
Mechanical Properties:
The mechanical properties of UNS C17200 copper are tabulated below.
Properties | Metric | Imperial |
Hardness, Rockwell B | 80.0 - 85.0 | 80.0 - 85.0 |
Tensile strength, ultimate | 1280 - 1480 MPa | 186000 - 215000 psi |
Tensile strength, yield | 965 - 1205 MPa | 140000 - 174800 psi |
Elongation at break | 15.0 - 30.0% | 15.0 - 30.0% |
Modulus of elasticity | 125 - 130 GPa | 18100 - 18900 ksi |
Poissons ratio | 0.300 | 0.300 |
Machinability (UNS C36000 (free-cutting brass) = 100%) | 20% | 20% |
Shear modulus | 50.0 GPa | 7250 ksi |
C17300 copper alloys can be welded using soldering, brazing, gas shielded arc welding, coated metal arc welding, spot welding, seam welding and butt welding. Oxyacetylene welding is not recommended for this type of alloys.
The following are the major applications of UNS C17300 copper:
Product Details:
| Minimum Order Quantity | 10 Kg |
| Thickness | 50 mm |
| Surface Finishing | Smooth |
| Size | 3 meter |
| Material | Beryllium Copper |
| Shape | Rectangular |
| Grade | Alloy C17300 |
| Brand | FHA |
| Usage/Application | Construction |
| Surface Treatment | Hot Rolled |
| UNS | C17300 DIN 2.1248 |
UNS C17300 beryllium copper alloys are heat treatable, ductile and can be mill hardened. They offer tensile strength of 1380 MPa (200 ksi). These steels are suitable for applications requiring good conductivity, high strength and stiffness.
This article will give an overview of UNS C17300 beryllium copper alloys.
| Element | Content (%) |
|---|---|
| Cu | 97.7 |
| Be | 1.9 |
| Co | 0.40 |
The physical properties of UNS C17300 copper are given in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density (during age hardening, 2% max. decrease in length and 6% max. increase in density) | 8.25 g/cm3 | 0.298 lb/in3 |
| Melting point | 866°C | 1590°F |
The mechanical properties of UNS C17300 copper are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Hardness, Rockwell B | 80.0 - 85.0 | 80.0 - 85.0 |
| Tensile strength, ultimate | 515 - 585 MPa | 74700 - 84800 psi |
| Tensile strength, yield | 275 - 345 MPa | 39900 - 50000 psi |
| Elongation at break | 15.0 - 30.0% | 15.0 - 30.0% |
| Modulus of elasticity | 125 - 130 GPa | 18100 - 18900 ksi |
| Poissons ratio | 0.300 | 0.300 |
| Machinability (UNS C36000 (free-cutting brass) = 100%) | 20% | 20% |
| Shear modulus | 50.0 GPa | 7250 ksi |