Fountainhead Alloys
Opera House, Mumbai, Maharashtra
GST No. 27AKOPC9787G1ZI
TrustSEAL Verified
Call 0804764305194% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 50 Kg |
| Thickness | 6 mm |
| Grade | 7039 |
| Type | Sheet |
| Tolerance | -0.00mm/+5.00mm |
| Finish | Bright Smooth Finish |
| Usage/Application | Construction |
| Material | Aluminum Alloy |
| Standard | D74S 74530 |
Aluminium is one of the lightest available commercial metals with a density approximately one-third that of steel or copper. It can be easily fabricated into many forms such as foil, sheets, rod, tube, geometric shapes, and wire.
Aluminium / aluminum 7039 alloy is a heat treatable wrought alloy. The following datasheet will provide more details about aluminium / aluminum 7039 alloy.
The following table shows the chemical composition of aluminium / aluminum 7039 alloy.
Thickness:
| Element | Content (%) |
|---|---|
| Zinc, Zn | 3.5 - 4.5 |
| Magnesium, Mg | 2.3 - 3.3 |
| Silicon, Si | 0.3 max |
| Iron, Fe | 0.4 max |
| Chromium, Cr | 0.15 - 0.25 |
| Manganese, Mn | 0.1 - 0.4 |
| Copper, Cu | 0.1 max |
| Titanium, Ti | 0.1 max |
| Remainder (total) | 0.15 max |
| Aluminum, Al | Remainder |
The physical properties of aluminium / aluminum 7039 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.74 g/cm³ | 0.0990 lb/in³ |
| Melting point | 482-638°C | 900-1180 °F |
The mechanical properties of aluminium / aluminum 7039-T64 alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength (@diameter 12.7 mm/0.500 in) | 450 MPa | 65300 psi |
| Yield strength (@diameter 12.7 mm/0.500 in) | 380 MPa | 55100 psi |
| Elongation at break (@diameter 12.7 mm/0.500 in) | 13% | 13% |
| Elastic modulus | 69.6 GPa | 10100 ksi |
| Shear strength | 255 MPa | 37000 psi |
| Hardness, Brinell (@load 500 kg; thickness 10.0 mm/1100 lb;0.394 in) | 133 | 133 |
| Hardness, Knoop (converted from Brinell hardness value) | 167 | 167 |
| Hardness, Rockwell A (converted from Brinell hardness value) | 50 | 50 |
| Hardness, Rockwell B (converted from brinell hardness value) | 81 | 81 |
| Hardness, Vickers (converted from Brinell hardness value) | 153 | 153 |
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Shape | Rectangular |
| Brand | FHA |
| Thickness | 2 mm |
| Grade | Al 6066 |
| Type | Sheet |
| Tolerance | -0.00mm/+5.00mm |
| Finish | Bright Smooth Finish |
| Material | Aluminum Alloy |
| Standard | 64423 H11 C62S |
| Length | 6000 mm |
Aluminium / Aluminum alloys have good corrosion resistance. They tend to lose some of their strength when subjected to high temperatures. However, their strength can be increased when exposed to subzero temperatures.
The following datasheet gives an overview of Aluminium / Aluminum 6066 alloy.
The following table shows the chemical composition of Aluminium / Aluminum 6066 alloy.
| Element | Content (%) |
|---|---|
| Aluminium / Aluminum, Al | 95.7 |
| Silicon, Si | 1.40 |
| Magnesium, Mg | 1.10 |
| Copper, Cu | 1 |
| Manganese, Mn | 0.8 |
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.6-2.8 g/cm3 | 0.0939- 0.101 lb/in3 |
The mechanical properties of Aluminium / Aluminum 6066 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 150 MPa | 21755 psi |
| Yield strength | 83 MPa | 12038 psi |
| Shear strength | 97 MPa | 14069 psi |
| Fatigue strength | 110 MPa | 15954 psi |
| Elastic modulus | 70-80 GPa | 10153-11603 ksi |
| Poisson's ratio | 0.33 | 0.33 |
| Hardness | 43 | 43 |
Product Details:
| Minimum Order Quantity | 50 Kg |
| Shape | Rectangular |
| Type | Sheet |
| Grade | 8011 |
| Thickness | 60 mm |
| Brand | FHA |
| Surface Treatment | Bright Smooth Finish |
| Tolerance | -0.00mm/+5.00mm |
| Certification | EN 3.1 Inspection Report |
| Material | Aluminum Alloy |
Apart from iron, aluminium / aluminum is currently the next most widely used metal in the world. This is due to the fact that aluminium / aluminum has a unique combination of attractive properties. Properties such as its low weight, corrosion resistance, and easy maintenance of final product, have ensured that this metal and its alloys will be in use for a very long time.
Aluminium / aluminum 8011 alloy is a wrought alloy. The following datasheet will provide more details about aluminium / aluminum 8011 alloy.
Thickness:
The following table shows the chemical composition of aluminium / aluminum 8011 alloy.
| Element | Content (%) |
|---|---|
| Aluminum, Al | 97.3 - 98.9 |
| Iron, Fe | 0.60 - 1 |
| Silicon, Si | 0.50 - 0.90 |
| Manganese, Mn | ≤ 0.20 |
| Zinc, Zn | ≤ 0.10 |
| Copper, Cu | ≤ 0.10 |
| Titanium, Ti | ≤ 0.080 |
| Chromium, Cr | ≤ 0.050 |
| Magnesium, Mg | ≤ 0.050 |
| Remainder (each) | ≤ 0.050 |
| Remainder (total) | ≤ 0.15 |