Product Details:
Minimum Order Quantity | 50 Kilogram |
Material Grade | SS 17-4 PH |
Surface Treatment | Hot Rolled |
Shape | Rectangular |
Brand | FHA |
Material | UNS S17400 |
Thickness | 500 mm |
Usage / Application | Construction |
Certification | ISO |
Alloy 17-4 PH is a precipitation hardening martensitic stainless steel with Cu and Nb/Cb additions. The grade combines high strength, hardness (up to 572°F / 300°C), and corrosion resistance.
Mechanical properties can be optimized with heat treatment. Very high yield strength up to 1100-1300 MPa (160-190 ksi) can be achieved.
The grade should not be used at temperatures above 572°F (300°C) or at very low temperatures. It has adequate resistance to atmospheric corrosion or in diluted acids or salts where its corrosion resistance is equivalent to Alloy 304 or 430.
Composition:
Product Details:
Minimum Order Quantity | 50 Kilogram |
Material Grade | Incoloy 800HT |
Brand | FHA |
Material | Incoloy |
Thickness | 50 mm |
Shape | Rectangle |
Usage/Application | Construction |
Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Incoloy 800 was the first of these alloys and it was slightly modified into Incoloy 800H. This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Incoloy 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties. The nickel alloy is dual certified (800H/HT) and combines the properties of both forms. Incoloy 800H/HT alloy was intended for high temperature structural applications. The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. The general corrosion resistance is excellent. In the solution annealed condition, alloys 800H and 800HT have superior creep and stress rupture properties.
Alloy 800HT (UNS N08811) Chemical Composition, %
Ni | Cr | Fe | C | Al | Ti | Al+Ti |
---|---|---|---|---|---|---|
30.0-35.0 | 19.0-23.0 | 39.5 min | .06-.10 | .25-.60 | .25-.60 | 0.85-1.2 |
Product Details:
Minimum Order Quantity | 50 Piece |
Steel Grade | SS 17-7 PH |
Surface Treatment | Hot Rolled |
Brand | FHA |
Material | Stainless Steel |
Thickness | 500 mm |
Standard | UNS S17700 AMS 5528 DIN 1.4568 |
Usage / Application | Construction |
The chemical composition of stainless steel grade 17-7 PH is outlined in the following table.
Element | Content (%) |
---|---|
Chromium, Cr | 16-18 |
Nickel, Ni | 6.50 - 7.75 |
Manganese, Mn | 1 max |
Silicon, Si | 1 max |
Aluminum, Al | 0.75 - 1.50 |
Carbon, C | 0.09 max |
Phosphorous, P | 0.040 max |
Sulfur, S | 0.030 max |
Iron, Fe | Balance |
Product Details:
Minimum Order Quantity | 50 Kilogram |
Material Grade | Inconel 601 |
Standard Type | UNS N06601 |
Material | ASTM B168 |
Shape | Rectangular |
Brand | FHA |
Size | 2 inch |
Application | Pneumatic Connections, Hydraulic Pipe, Structure Pipe, Gas Pipe, Chemical Fertilizer Pipe |
Thickness | 10 mm |
Product Details:
Material Grade | SS316, SS316L, SS304, SS304L, ASTM A240 |
Thickness | 10 mm |
Brand | FHA |
Material | SS |
Usage/Application | Construction |
Shape | Rectangular |
Blue | 4500 |
Nominal Size | 2 inch |
Length | 6 m |
Product Details:
Minimum Order Quantity | 50 Kilogram |
Material | Inconel |
Usage/Application | Construction |
Length | 2000 m |
Brand | FHA |
Packaging Type | Roll |
Thickness | 10 mm |
Color | Silver |