Metal Bars

Product Details:

Super alloys have good creep and oxidation resistance, and can be formed in different shapes. They contain a number of elements in a variety of combinations to achieve the desired result, and can function at very high temperatures and mechanical stress. They are classified into three groups such as nickel-based, iron-based and cobalt-based alloys.

Nimonic 90™ is a nickel-chromium-cobalt alloy which can be strengthened by adding aluminum and titanium.

The following table shows the chemical composition of Nimonic 90™.

The physical properties of Nimonic 90™ are outlined in the following table.

The thermal properties of Nimonic 90™ are given in the following table.

Product Details:

Super alloys have good creep and oxidation resistance, and can be formed in different shapes. They contain a number of elements in a variety of combinations to achieve the desired result, and can function at very high temperatures and mechanical stress. They are classified into three groups such as nickel-based, iron-based and cobalt-based alloys.

Nimonic 90™ is a nickel-chromium-cobalt alloy which can be strengthened by adding aluminum and titanium.

The following table shows the chemical composition of Nimonic 90™.

The physical properties of Nimonic 90™ are outlined in the following table.

Product Details:

Aluminum alloys have strong corrosion resistance. At subzero temperatures, their strength increases, thus making them a useful low-temperature alloy. Their strength decreases if they are subjected to very high temperatures. The aluminum 7075 alloy has high strength.

The following datasheet gives more details about the aluminum 7075 alloy.

The following table shows the chemical composition of the aluminum 7075 alloy.

The physical properties of aluminum 7075 alloy are tabulated below.

The mechanical properties of aluminum 7075 alloy are outlined in the following table.

Product Details:

Aluminium alloy 6005i s a medium strength, heat treatable alloy with excellent corrosion resistance.

Alloy 6005 has properties between those of alloys 6061 and 6082 and can sometimes be used interchangeably with these alloys but 6005/6005A has better extrusion characteristics. It has a better mill surface finish, but it is difficult to produce thin-wall complicated shapes in 6005/6005A.

6005 has very good bending properties.

Chemical Composition

Table 1. Chemical composition for aluminium alloy 6005

Properties

Mechanical Properties

Table 2 (a). Mechanical properties for aluminium alloy 6005 T6

Product Details:

Nickel 201 UNS N02201 , Wire, Round Bar, Sheet/ Plate, Pipe

Characteristics:

• Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions.
• Outstanding resistance to caustic alkalis up to and including the molten state.
• In acid, alkaline and neutral salt solutions the material shows good resistance, but in oxidising salt solutions severe attack will occur.
• Resistant to all dry gases at room temperature and in dry chlorine and hydrogen chloride may be used in temperatures up to 550C.
• Resistance to mineral acids varies according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de-aerated acid.
• Virtually immune to inter granular attack above 315C, chlorates must be kept to a minimum.

Applications:

• Manufacture and handling of sodium hydroxide, particularly at temperature above 300C.
• Production of viscose rayon. Manufacture of soap.
• Analine hydrochloride production and in the chlorination of aliphatic hydrocarbons such as benzene, methane and ethane.
• Manufacture of vinyl chloride monomer.
• Reactors and vessels in which fluorine is generated and reacted with hydrocarbons.
• Automobile Industry, Construction, Pharmaceutical/Chemical Industry, Oil & Gas Industry

Chemistry:

Physical Properties

Tensile Data: