Inconel Fittings

Product Details:

The chemical composition of INCONEL alloy 725 is given in Table 1. High levels of nickel and chromium provide corrosion resistance in reducing and oxidizing environments. The substantial molybdenum content enhances resistance to reducing media and provides a high degree of resistance to pitting and crevice corrosion. Additionally, the combination of elements makes the alloy resistant to hydrogen embrittlement and stresscorrosion cracking. The properties of INCONEL alloy 725 are useful for a range of applications that require outstanding corrosion resistance along with high strength. The alloy is used for hangers, landing nipples, side pocket mandrels and polished bore  eceptacles in sour gas service, where it resists the effects of hydrogen sulfide, chlorides and carbon dioxide. The alloy is also attractive for high strength fasteners in marine applications, where it resists corrosion, pitting and crevice attack in sea water.

Chemical Composition, %:

• Nickel……………………………………………………………….55.0-59.0
• Chromium…………………………………………………………19.0-22.5
• Molybdenum…………………………………………………………7.0-9.5
• Niobium……………………………………………………………..2.75-4.0
• Titanium……………………………………………………………….1.0-1.7
• Aluminum…………………………………………………………0.35 max.
• Carbon…………………………………………………………….0.03 max.
• Manganese………………………………………………………0.35 max.
• Silicon……………………………………………………………..0.20 max.
• Phosphorus…………………………………………………….0.015 max.
• Sulfur……………………………………………………………..0.010 max.
• Iron……………………………………………………………………Balance

Product Details:

Driven by vision to achieve significant growth in the industry, we are engaged in providing a wide range of Inconel 617 Fittings.

Specifications:

• Usage: For fitting of various products
• Size: As per client’s need

Features:

• Optimum durability
• Rugged design
• Supreme finish

Available Size:

• 1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch

Additional Information:

• Item Code: Inconel617Fittings

Product Details:

Super alloys or high performance alloys are of three types that include iron-based, cobalt-based and nickel-based alloys. These alloys can be strengthened by precipitation hardening, solid-solution hardening and work hardening methods. Super alloys contain good oxidation and creep resistance and are available in varied shapes. These alloys can function under high mechanical stress and high temperatures and also in places that require high surface stability. Super alloy A-286 is an iron-based high temperature and high strength alloy. The following datasheet provides an overview of super alloy A-286.

Chemical Composition:

The chemical composition of super alloy A-286 is outlined in the following table.

Product Details:

Inconel 713C offers outstanding resistance to thermal fatigue and good castability while offering exceptional rupture strength at 1700°F (927°C). Inconel 713C is a nickel-chromium alloy that is ideally suited for jet engine gas turbine blades.

Chemical Composition Of Inconel™ 713CCarbon 0.20

• Manganese 1.0 max
• Sulfur 0.015 max
• Silicon 1.0 max
• Chromium 11.0-14.0
• Molybdenum 3.5-5.5
• Titanium 0.25-1.25
• Aluminum 5.5-6.5
• Iron 5.0 max
• Columbium + Ta 1.0-3.0
• Nickel remainder

Applications Of Inconel™ 713C:

• Inconel 713C is most commonly used for jet engine gas turbine blades.

Weldabiltiy Of Inconel™ 713C:

• Inconel 713C can be used in applications using very low restraint
• Use Inco-Weld A electrode
• Flash-butt weld
• Inconel 713C is also good for hydrogen-atmosphere brazing with normal high-heat brazing alloy with electroplated mating surfaces

Product Details:

INCONEL alloy X-750 (UNS N07750/W. Nr. 2.4669) is a precipitation-hardenable nickel-chromium alloy used for its corrosion and oxidation resistance and high strength at temperatures to 1300°F. Although much of the effect of precipitation hardening is lost with increasing temperature over 1300°F, heat-treated material has useful strength up to 1800°F. Alloy X-750 also has excellent properties down to cryogenic temperatures.The economics of INCONEL alloy X-750 coupled with its availability in all standard mill forms has resulted in applications in a wide variety of industrial fields. In gas turbines, it is used for rotor blades and wheels, bolts, and other structural members. INCONEL alloy X-750 is used extensively in rocket-engine thrust chambers. Airframe applications include thrust reversers and hot-air ducting systems. Large pressure vessels are formed from INCONEL alloy X-750. Other applications are heat-treating fixtures, forming tools, extrusion dies, and test machine grips. For springs and fasteners, INCONEL alloy X-750 is used from sub-zero to 1200°F.Depending on the application and the properties desired, various heat treatments are employed. For service above 1100°F, particularly where loads are to be sustained for long times, optimum properties are achieved by solution treating (2100°F) plus stabilisation treating (1550°F) plus precipitation treating (1300°F). For service below 1100°F, the alloy may be strengthened by precipitation treating after hot or cold working or by precipitation treating after equalising or solution treating. A furnace-cooling treatment is also used to develop optimum properties for some applications.The various heat treatments and the properties developed are described under the section on Mechanical Properties.Property values in this bulletin – the results of extensive testing – are typical of the alloy but, unless shown as limiting, should not be used as specification values.


Available Size:

• 1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch

Limiting Chemical Composition (%)

• Nickel (plus Cobalt) …………………………. 70.00 min.
• Chromium …………………………………… 14.0-17.0
• Iron……………………………………………………………………….5.0-9.0
• Titanium……………………………………………………………..2.25-2.75
• Aluminum…………………………………………………………..0.40-1.00
• Niobium (plus Tantalum)……………………………………….0.70-1.20
• Manganese…………………………………..1.00 max.
• Silicon……………………………………….0.50 max.
• Sulfur……………0.01 max.
• Copper……………0.50 max.
• Carbon… ………0.08 max.
• Cobalt1 ………….1.00 max

Product Details:

INCOLOY alloys belong to the category of super austenitic stainless steels. These alloys have nickel-chromium-iron as the base metals, with additives such as molybdenum, copper, nitrogen and silicon. These alloys are known for their excellent strength at elevated temperatures and good corrosion resistance in a variety of corrosive environments.

INCOLOY alloy 800 is an alloy of nickel, iron and chromium. The alloy is capable of remaining stable and maintaining its austenitic structure even after long time exposures to high temperatures. Other characteristics of the alloy are good strength, and high resistance to oxidizing, reducing and aqueous environments. The standard forms in which this alloy is available are round, flats, forging stock, tube, plate, sheet, wire and strip.

This datasheet will look into the chemical composition, properties and applications of INCOLOY 800.

Chemical Composition:

The chemical composition of INCOLOY alloy 800 is given in the following table.

Product Details:

Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys having high resistance to carburization and oxidation in high-temperature exposure and with good strength. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 % aluminum and titanium in alloy 800HT.

Incoloy 800 was the first of these alloys and it was slightly modified into Incoloy 800H. The modification made was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Incoloy 800HT has more modifications to the combined aluminum and titanium levels (.85-1.20%) to ensure optimum high temperature properties.

The nickel alloy is dual certified (800H/HT) and combines the properties of both forms. Incoloy 800H/HT alloy was actually meant for high-temperature structural applications. These alloys are resistant to embrittlement from precipitation of sigma phase and chloride stress-corrosion cracking due to the nickel content. The corrosion resistance is quite high.

In the solution annealed condition, alloys 800H and 800HT have excellent creep and stress rupture properties. The dual certified 800H/HT alloy is commonly available also with Mega Mex.

Incoloy 800 is mainly used in applications with temperatures up to 1100° F, where alloys 800H and 800HT are normally used in temperatures above 1100° F where resistance to creep and rupture is required. The chemical balance allows the nickel steel alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres.

Incoloy 800HT will not become embrittled even after long periods of usage in the 1200-1600° F range where many stainless steels become brittle.

Product Details:

Owing to the efforts of our skilled professionals, we have been constantly engaged in offering a qualitative assortment of Inconel 625 Fittings.

Specifications:

• Material: Steel
• Used for sanitary fitting

Features:

• Supreme finish
• Optimum durability
• Rugged design

Product Details:

With rich industry experience & knowledge, we have been able to provide the best array of Inconel 601 Fitting.

Specifications:

• Used in pipe lifting
• Material: steel

Features:

• Ruggedness
• Excellent strength
• Superior finish

Available Size:

• 1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch, 4 inch

Product Details:

We are actively engaged in offering an extensive range of Inconel 600 Fittings for catering the diversified requirements of our clients.

Specifications:

• Usage: For fitting
• Size: Customized

Features:

• Fine finish
• Rugged design
• Optimal durability