FountainHead Alloys
FountainHead Alloys
Opera House, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Aluminium Series

We are a leading Manufacturer of aluminum alloy 2017 uns a92017, aluminum alloys 6061 65032 h20 al-mg-si cu - pipe/tube, aluminum alloy 2024 - round bar sheet pipe wire forged block, aluminum alloys 6351 64430 h30/al-mg-si 1/b51s - pipe/tube, aluminum alloys 6082 al-mg-si 1 - pipe/tube and aluminium alloys 6101 63401 91e d50s e.al.mg.si 0.5 - sheet from Mumbai, India.

Aluminum Alloy 2017 UNS A92017

Aluminum Alloy 2017 UNS A92017
  • Aluminum Alloy 2017 UNS A92017
Get Best Quote
Approx. Price: Rs 875 / KgGet Latest Price

Product Details:

Minimum Order Quantity50 Kg
Unit Length6 m
BrandFHA
GradeAl2017
ShapeRound
ColorSilver
Diameter5mm to 500mm Dia
Size0.5 to 50mm
Thickness0.5 to 50mm
Pipe FluidPipe
ApplicationManufacturing, Construction, School/College Workshop
Single Piece Length3 meter, 6 meter, 18 meter
Thickness/Diameter0-1 inch, 1-2 inch, 2-3 inch
Surface FinishFinished Polished
MaterialAluminium
Green6500

Introduction

Aluminium/aluminum and its alloys are essential materials in various industries such as aerospace, marine, construction, and automobile.

Aluminium/aluminum 2017 alloy is a heat treatable wrought alloy with intermediate strength. It is stronger than aluminium /aluminum 2011, but harder to machine. Workability is fair with ductility and formability better that aluminium / aluminum 2014. Arc and resistance weldability of this alloy are satisfactory while corrosion resistance is fair.

The following datasheet will provide more details about aluminium / aluminum 2017 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 2017 alloy.

ElementContent (%)
Aluminum, Al 91.5 - 95.5
Copper, Cu 3.5 - 4.5
Iron, Fe 0.7 max
Manganese, Mn 0.4 - 1
Magnesium, Mg 0.4 - 0.8
Silicon, Si 0.2 - 0.8
Zinc, Zn 0.25 max
Titanium, Ti 0.15 max
Chromium, Cr 0.1 max
Remainder (each) 0.05 max
Remainder (total) 0.15 max
Physical Properties

The physical properties of aluminium / aluminum 2017 alloy are outlined in the following table.

PropertiesMetricImperial
Density 2.79 g/cm³ 0.101 lb/in³
Melting point 513-641°C 955 - 1185°F
Mechanical Properties

The mechanical properties of aluminium / aluminum 2017 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength (annealed) 179 MPa 26000 psi
Yield strength (annealed) 69 MPa 10000 psi
Elongation (annealed) 22% 22%
Elastic modulus 72 GPa 10500 ksi
Shear strength (annealed) 124 MPa 18000 psi
Request
Callback


Additional Information:

  • Item Code: AluminumAlloy_2017-RoundBar_Sheet_Pipe_Wire_ForgedBlock
  • Delivery Time: 15 Days
Yes! I am Interested

Aluminum Alloys 6061 65032 H20 Al-Mg-Si Cu - Pipe/Tube

Aluminum Alloys 6061 65032 H20 Al-Mg-Si Cu - Pipe/Tube
  • Aluminum Alloys 6061 65032 H20 Al-Mg-Si Cu - Pipe/Tube
Get Best Quote
Approx. Price: Rs 180 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Unit Length6 m, 12 m, 18 m, 24m
Size1", 1.5", 2", 3", 4"
Surface FinishAnodized, Brushed, Mill Finished, Finished Polished
ShapeRound, Square, Rectangular, Oval
Green4500
MaterialAluminum
Usage/ApplicationChemical Handling
GradeAl 6061 65032 H20
Size/Diameter5 to 500mm Dia


Aluminium alloy 6061 is one of the most extensively used of the 6000 series aluminium alloys. It is a versatile heat treatable extruded alloy with medium to high strength capabilities.

Composition

Table 1. Typical composition of aluminium alloy 6061

Component

Amount (wt.%)

Aluminium

Balance

Magnesium

0.8-1.2

Silicon

0.4 – 0.8

Iron

Max. 0.7

Copper

0.15-0.40

Zinc

Max. 0.25

Titanium

Max. 0.15

Manganese

Max. 0.15

Chromium

0.04-0.35


Key Properties

Typical properties of aluminium alloy 6061 include:

• Medium to high strength

• Good toughness

• Good surface finish

• Excellent corrosion resistance to atmospheric conditions

• Good corrosion resistance to sea water

• Can be anodized

• Good weldability and brazability

• Good workability

• Widely available

Physical Properties

Density: 2.7 g/cm3

Melting Point: Approx 580°C

Modulus of Elasticity: 70-80 GPa

Poissons Ratio: 0.33

Mechanical Properties

Temper

Ultimate Tensile Strength (MPa)

0.2% Proof Stress (MPa)

Brinell Hardness (500kg load, 10mm ball)

Elongation 50mm dia (%)

0

110-152

65-110

30-33

14-16

T1

180

95-96

16

T4

179 min

110 min

T6

260-310

240-276

95-97

9-13


Thermal Properties

Co-Efficient of Thermal Expansion (20-100°C): 23.5x10-6 m/m.°C

Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_6061_65032_H20-Pipe-Tube
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloy 2024 - Round Bar Sheet Pipe Wire Forged Block

Aluminum Alloy 2024 - Round Bar Sheet Pipe Wire Forged Block
  • Aluminum Alloy 2024 - Round Bar Sheet Pipe Wire Forged Block
Get Best Quote
Approx. Price: Rs 220 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Diameter5 to 500mm Dia
ColorSilver
Material2024
GradeAl 2024
Size5 to 500mm
BrandFHA
Material Grade2024
ShapeRound Bar
Weight50 TO 500Kg
Dimensions (l x b x h)5 TO 500MM
Black6500

Introduction

Aluminium / Aluminum alloys have strong corrosion resistance characteristics. These alloys are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F). An increase in strength takes place when these alloys are exposed at subzero temperatures and strength is lost when these alloys are exposed to high temperatures. Aluminium / Aluminum alloys are good low-temperature alloys.

The following datasheet provides an overview of the Aluminium / Aluminum 2024 alloy.

Chemical Composition

The chemical composition of the Aluminium / Aluminum 2024 alloy is outlined in the following table.

ElementContent (%)
Aluminium / Aluminum, Al93.50
Copper, Cu4.4
Magnesium, Mg1.5
Manganese, Mn0.6
Physical Properties

The following table shows the physical properties of the Aluminium / Aluminum 2024 alloy.

PropertiesMetricImperial
Density2.77 g/cm30.10007 lb/in3
Melting point510°C950°F
Mechanical Properties

The mechanical properties of the Aluminium / Aluminum 2024 alloy are displayed in the following table.

PropertiesMetricImperial
Elastic modulus70-80 Gpa10152-11603 ksi
Poisson's ratio0.330.33
Thermal Properties

The thermal properties of the Aluminium / Aluminum 2024 alloy are given in the following table.

PropertiesMetric
Imperial
Thermal expansion (@20-100ºC/68-212ºF)22.8 (10-6/ºC)12.71 µin/in°F
Thermal conductivity (@25ºC/77ºF)190 (W/mK)1319 BTU in/hr.ft².°F
Request
Callback


Additional Information:

  • Item Code: AluminumAlloy_2024-RoundBar_Sheet_Pipe_Wire_ForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloys 6351 64430 H30/Al-Mg-Si 1/B51S - Pipe/Tube

Aluminum Alloys 6351 64430 H30/Al-Mg-Si 1/B51S - Pipe/Tube
  • Aluminum Alloys 6351 64430 H30/Al-Mg-Si 1/B51S - Pipe/Tube
Get Best Quote
Approx. Price: Rs 180 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Unit Length6 m, 12 m, 18 m, 24m
Surface FinishAnodized, Brushed, Mill Finished, Finished Polished
GradeAluminium 6351
Material GradeAl 6351 64430 H30
ShapeRound, Square, Rectangular, Oval
Size1", 1.5", 2", 3", 4"
Thickness0.5 to 50mm Thick
Red3500

Introduction

Aluminum alloys tend to lose their strength when they are exposed to temperatures of about 200-250°C. However, their strength increases at subzero temperatures. They have high corrosion resistance.

The following datasheet will discuss in detail about the aluminum 6351 alloy.

Chemical Composition

The chemical composition of the aluminum 6351 alloy is tabulated below.

ElementContent (%)
Aluminum, Al97.8
Silicon, Si1
Manganese, Mn0.6
Magnesium, Mg0.6
Physical Properties

The following table shows the physical properties of the aluminum 6351 alloy.

PropertiesMetricImperial
Density2.6-2.8 g/cc0.0939- 0.101 lb/in3
Mechanical Properties

The mechanical properties of the aluminum 6351 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength250 MPa36260 psi
Yield strength150 MPa21756 psi
Shear strength200 MPa29008 psi
Fatigue strength90 MPa13054 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.0330.033
Elongation20%20%
Hardness9595
Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_6351_64430_H30-Pipe-Tube
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloys 6082 Al-Mg-Si 1 - Pipe/Tube

Aluminum Alloys 6082 Al-Mg-Si 1 - Pipe/Tube
  • Aluminum Alloys 6082 Al-Mg-Si 1 - Pipe/Tube
Get Best Quote
Approx. Price: Rs 170 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Unit Length6 m, 12 m, 18 m, 24m
Size1", 1.5", 2", 3", 4"
Surface FinishAnodized, Brushed, Mill Finished, Finished Polished
ShapeRound, Square, Rectangular, Oval
Blue4600
MaterialAl6082
Usage/ApplicationChemical Handling
GradeAluminium 6082
Size/Diameter5 to 500mm

 

Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, Aluminium alloy 6082is the alloy most commonly used for machining.

As a relatively new alloy, the higher strength of Aluminium alloy 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.

In the T6 and T651 temper, Aluminium alloy 6082 machines well and produces tight coils of swarf when chip breakers are used.

Chemical Composition of Aluminium alloy 6082

Table 1. Chemical composition for aluminium alloy 6082

Element

% Present

Si

0.7-1.3

Fe

0.0-0.5

Cu

0.0-0.1

Mn

0.4-1.0

Mg

0.6-1.2

Zn

0.0-0.2

Ti

0.0-0.1

Cr

0.0-0.25

Al

Balance

Properties of Aluminium alloy 6082

Mechanical Properties of Aluminium alloy 6082

Table 2 (a). Mechanical properties for aluminium alloy 6082 Soft O

BS EN 485-2:2008
Sheet
0.4mm to 6.00mm

Property

Value

Proof Stress

85 Max MPa

Tensile Strength

150 Max MPa

Hardness Brinell

40 HB

 

Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_6082-Pipe-Tube
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminium Alloys 6101 63401 91E D50S E.Al.Mg.Si 0.5 - Sheet

Aluminium Alloys 6101 63401 91E D50S E.Al.Mg.Si 0.5 - Sheet
  • Aluminium Alloys 6101 63401 91E D50S E.Al.Mg.Si 0.5 - Sheet
Get Best Quote
Approx. Price: Rs 570 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
TypePlate
GradeASTM B317,SAE J454
Thickness0.5 to 45mm Thick
MaterialAluminium
Size6 to 24 Meter
Material Grade6101
BrandJindal
Tolerance-0.00mm/+5.00mm
Aluminium Grade6101
I Deal InNew Only
Is It CustomizedCustomized

Introduction

Aluminium / Aluminum alloys have good corrosion resistance. The strength of these alloys can be reduced when they are exposed to high temperatures. However, their strength can be increased at subzero temperatures. Aluminium / Aluminum 6101 alloy has good mechanical strength and high electrical conductivity.

The following datasheet will discuss in detail about Aluminium / Aluminum 6101 alloy.

Chemical Composition

Black:4000
Size:1"
Unit Length : 6 m ,12 m , 18 m , 24m
Shape : Round Square , Rectangular, Oval
Surface Finish :Anodized, Brushed , Mill Finished ,Finished Polished

The following table shows the chemical composition of Aluminium / Aluminum 6101 alloy.

ElementContent (%)
Aluminium / Aluminum, Al98.9
Magnesium, Mg0.60
Silicon, Si0.50
Physical Properties

The physical properties of Aluminium / Aluminum 6101 alloy are given in the following table.

PropertiesMetricImperial
Density2.7 g/cm30.0975 lb/in3
Melting point588°C1090°F
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 6101 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength97 MPa14069 psi
Yield strength76 MPa11023 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Thermal Properties

The thermal properties of Aluminium / Aluminum 6101 alloy are given in the following table.

PropertiesConditions
T (ºC)Treatment
Thermal expansion23 (10-6/ºC)20-100-
Thermal conductivity218 W/mK25T6
Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_6101_63401_91E_D50S-Sheet
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloys 6351 64430 H30 Al-Mg-Si1 B51S - Sheet

Aluminum Alloys 6351 64430 H30 Al-Mg-Si1 B51S - Sheet
  • Aluminum Alloys 6351 64430 H30 Al-Mg-Si1 B51S - Sheet
Get Best Quote
Approx. Price: Rs 465 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
TypeSheet
GradeUNS A96351,ASTM B221
Thickness0.5 to 50mm Thick
MaterialAluminium
Size6 to 24 Meter
Material GradeAluminium 6351
BrandJindal
Tolerance-0.00mm/+5.00mm
Aluminium Grade6351
FinishBright Smooth Finish
I Deal InNew Only
Is It CustomizedCustomized

Introduction

Aluminum alloys tend to lose their strength when they are exposed to temperatures of about 200-250°C. However, their strength increases at subzero temperatures. They have high corrosion resistance.

The following datasheet will discuss in detail about the aluminum 6351 alloy.

Chemical Composition

Red:3500
Size:5 TO 500MM
Brand:IMPORTED

The chemical composition of the aluminum 6351 alloy is tabulated below.

ElementContent (%)
Aluminum, Al97.8
Silicon, Si1
Manganese, Mn0.6
Magnesium, Mg0.6
Physical Properties

The following table shows the physical properties of the aluminum 6351 alloy.

PropertiesMetricImperial
Density2.6-2.8 g/cc0.0939- 0.101 lb/in3
Mechanical Properties

The mechanical properties of the aluminum 6351 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength250 MPa36260 psi
Yield strength150 MPa21756 psi
Shear strength200 MPa29008 psi
Fatigue strength90 MPa13054 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.0330.033
Elongation20%20%
Hardness9595
Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_6351_64430_H30-Sheet-Plate
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloys 6005 62400 C51S - Pipe/Tube

Aluminum Alloys 6005 62400 C51S - Pipe/Tube
  • Aluminum Alloys 6005 62400 C51S - Pipe/Tube
Get Best Quote
Approx. Price: Rs 180 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Unit Length6 m, 12 m, 18 m, 24m
Size1", 1.5", 2", 3", 4"
Surface FinishAnodized, Brushed, Mill Finished, Finished Polished
ShapeRound, Square, Rectangular, Oval
Black4000
MaterialAluminium
Usage/ApplicationChemical Handling
GradeAl 6005
Size/Diameter5 to 500mm Dia

 

Aluminium alloy 6005i s a medium strength, heat treatable alloy with excellent corrosion resistance.

Alloy 6005 has properties between those of alloys 6061 and 6082 and can sometimes be used interchangeably with these alloys but 6005/6005A has better extrusion characteristics. It has a better mill surface finish, but it is difficult to produce thin-wall complicated shapes in 6005/6005A.

6005 has very good bending properties.

Chemical Composition

Table 1. Chemical composition for aluminium alloy 6005

Element

% Present

Si

0.5-0.9

Fe

0.0-0.35

Cu

0.0-0.3

Mn

0.0-0.5

Mg

0.4-0.7

Zn

0.0-0.2

Ti

0.0-0.1

Cr

0.0-0.3

Mn+Cr

0.12-0.5

Al

Balance

Properties

Mechanical Properties

Table 2 (a). Mechanical properties for aluminium alloy 6005 T6

BS EN 755-2:2008
Rod Bar
up to 25mm Dia. A/F

Property

Value

Proof Stress

225 Min MPa

Tensile Strength

270 Min MPa

Elongation A50 mm

8 %

Shear Strength

205 MPa

Hardness Brinell

90 HB

Elongation A

10 Min %

 

 

 

Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_6005_62400_C51S-Pipe-Tube
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloys 6082 Al-Mg-Si 1 - Forged Block

Aluminum Alloys 6082  Al-Mg-Si 1 - Forged Block
  • Aluminum Alloys 6082  Al-Mg-Si 1 - Forged Block
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Application Hydraulic Pipe, Pneumatic Connections, Structure Pipe, Gas Pipe, Chemical Fertilizer Pipe
BrandIMPORTED
Thread Size5 TO 500MM
Size1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch
Black5000

 

Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, Aluminium alloy 6082is the alloy most commonly used for machining.

As a relatively new alloy, the higher strength of Aluminium alloy 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.

In the T6 and T651 temper, Aluminium alloy 6082 machines well and produces tight coils of swarf when chip breakers are used.

Chemical Composition of Aluminium alloy 6082

Table 1. Chemical composition for aluminium alloy 6082

Element

% Present

Si

0.7-1.3

Fe

0.0-0.5

Cu

0.0-0.1

Mn

0.4-1.0

Mg

0.6-1.2

Zn

0.0-0.2

Ti

0.0-0.1

Cr

0.0-0.25

Al

Balance

Properties of Aluminium alloy 6082

Mechanical Properties of Aluminium alloy 6082

Table 2 (a). Mechanical properties for aluminium alloy 6082 Soft O

BS EN 485-2:2008
Sheet
0.4mm to 6.00mm

Property

Value

Proof Stress

85 Max MPa

Tensile Strength

150 Max MPa

Hardness Brinell

40 HB

 

Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_6082-ForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloys 6082 Al-Mg-Si 1 - Round Bar

Aluminum Alloys 6082  Al-Mg-Si 1 - Round Bar
  • Aluminum Alloys 6082  Al-Mg-Si 1 - Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
BrandIMPORTED
UsageConstruction , Manufacturing, Household Repair
Size5 TO 500MM DIA
Single Piece Length3 meter, 18 meter, >36 meter, 36 meter, 6 meter
Red5200

 

Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, Aluminium alloy 6082is the alloy most commonly used for machining.

As a relatively new alloy, the higher strength of Aluminium alloy 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.

In the T6 and T651 temper, Aluminium alloy 6082 machines well and produces tight coils of swarf when chip breakers are used.

Chemical Composition of Aluminium alloy 6082

Table 1. Chemical composition for aluminium alloy 6082

Element

% Present

Si

0.7-1.3

Fe

0.0-0.5

Cu

0.0-0.1

Mn

0.4-1.0

Mg

0.6-1.2

Zn

0.0-0.2

Ti

0.0-0.1

Cr

0.0-0.25

Al

Balance

Properties of Aluminium alloy 6082

Mechanical Properties of Aluminium alloy 6082

Table 2 (a). Mechanical properties for aluminium alloy 6082 Soft O

BS EN 485-2:2008
Sheet
0.4mm to 6.00mm

Property

Value

Proof Stress

85 Max MPa

Tensile Strength

150 Max MPa

Hardness Brinell

40 HB

 

Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_6082_RoundBar
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloys 6351 64430 H30 Al-Mg-Si 1 B51S - Round Bar

Aluminum Alloys 6351 64430 H30 Al-Mg-Si 1  B51S - Round Bar
  • Aluminum Alloys 6351 64430 H30 Al-Mg-Si 1  B51S - Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
BrandIMPORTED
UsageManufacturing, Construction, Household Repair
Size5 TO 500MM DIA
Single Piece Length18 meter, 6 meter, 3 meter, >36 meter, 36 meter
Green3000

Introduction

Aluminum alloys tend to lose their strength when they are exposed to temperatures of about 200-250°C. However, their strength increases at subzero temperatures. They have high corrosion resistance.

The following datasheet will discuss in detail about the aluminum 6351 alloy.

Chemical Composition

The chemical composition of the aluminum 6351 alloy is tabulated below.

ElementContent (%)
Aluminum, Al97.8
Silicon, Si1
Manganese, Mn0.6
Magnesium, Mg0.6
Physical Properties

The following table shows the physical properties of the aluminum 6351 alloy.

PropertiesMetricImperial
Density2.6-2.8 g/cc0.0939- 0.101 lb/in3
Mechanical Properties

The mechanical properties of the aluminum 6351 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength250 MPa36260 psi
Yield strength150 MPa21756 psi
Shear strength200 MPa29008 psi
Fatigue strength90 MPa13054 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.0330.033
Elongation20%20%
Hardness9595
Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_6351_64430_H30-RoundBar
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloy 2011 - Round Bar Sheet Pipe Wire Forged Block

Aluminum Alloy 2011 - Round Bar Sheet Pipe Wire Forged Block
  • Aluminum Alloy 2011 - Round Bar Sheet Pipe Wire Forged Block
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Application Construction, School/College Workshop, Manufacturing
Single Piece Length6 meter, >36 meter, 36 meter, 18 meter, 3 meter
Thickness/Diameter3-4 inch, >4 inch, 1-2 inch, 0-1 inch, 2-3 inch
BrandIMPORTED
Blue5000

Aluminium alloy 2011 is a high mechanical strength alloy that machines exceptionally well. Often called a Free Machining Alloy or ‘FMA’ it is well suited to use in automatic lathes.

Machining at high speeds produces fine chips that are easily removed. The excellent machining characteristics allow the production of complex and detailed parts. In some circumstances Aluminium alloy 2011 can replace free machining brass without the need for alterations to tooling.

 

 

It has poor corrosion resistance, which means parts made from Aluminium alloy 2011tend to be anodised to provide additional surface protection.

When higher levels of corrosion resistance are required, 6262 T9 may be a suitable replacement.

Chemical Composition of Aluminium Alloy 2011

Table 1. Chemical composition for aluminium alloy 2011

Element% Present
Si0.4%
Fe0.7%
Cu5.0-6.0%
Pb0.2-0.6%
Bi0.2-0.6%
Zn0.3%
Other0.15%
AlBalance
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request.. AluminumAlloy_2011 - RoundBar_Sheet_Pipe_Wire_ForgedBlock
Yes! I am Interested

Aluminum Alloys 6101 63401 91E D50S - Forged Block

Aluminum Alloys 6101 63401 91E D50S - Forged Block
  • Aluminum Alloys 6101 63401 91E D50S - Forged Block
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Application Gas Pipe, Chemical Fertilizer Pipe, Pneumatic Connections, Structure Pipe, Hydraulic Pipe
BrandIMPORTED
Thread Size5 TO 500MM
Size1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch
Black4500

Introduction

Aluminium / Aluminum alloys have good corrosion resistance. The strength of these alloys can be reduced when they are exposed to high temperatures. However, their strength can be increased at subzero temperatures. Aluminium / Aluminum 6101 alloy has good mechanical strength and high electrical conductivity.

The following datasheet will discuss in detail about Aluminium / Aluminum 6101 alloy.

Chemical Composition

The following table shows the chemical composition of Aluminium / Aluminum 6101 alloy.

ElementContent (%)
Aluminium / Aluminum, Al98.9
Magnesium, Mg0.60
Silicon, Si0.50
Physical Properties

The physical properties of Aluminium / Aluminum 6101 alloy are given in the following table.

PropertiesMetricImperial
Density2.7 g/cm30.0975 lb/in3
Melting point588°C1090°F
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 6101 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength97 MPa14069 psi
Yield strength76 MPa11023 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Thermal Properties

The thermal properties of Aluminium / Aluminum 6101 alloy are given in the following table.

PropertiesConditions
T (ºC)Treatment
Thermal expansion23 (10-6/ºC)20-100-
Thermal conductivity218 W/mK25T6
Request
Callback


Additional Information:

  • Item Code: AluminumAlloys61016340191ED50SForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloys 8011 40800 Al-Fe-Si - Round Bar

Aluminum Alloys 8011 40800 Al-Fe-Si - Round Bar
  • Aluminum Alloys 8011 40800 Al-Fe-Si - Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Application Construction, Manufacturing, School/College Workshop
Single Piece Length>36 meter, 36 meter, 18 meter, 6 meter, 3 meter
Thickness/Diameter3-4 inch, 2-3 inch, >4 inch, 0-1 inch, 1-2 inch
BrandIMPORTED
Red5000

Introduction

Apart from iron, aluminium / aluminum is currently the next most widely used metal in the world. This is due to the fact that aluminium / aluminum has a unique combination of attractive properties. Properties such as its low weight, corrosion resistance, and easy maintenance of final product, have ensured that this metal and its alloys will be in use for a very long time.

Aluminium / aluminum 8011 alloy is a wrought alloy. The following datasheet will provide more details about aluminium / aluminum 8011 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 8011 alloy.

ElementContent (%)
Aluminum, Al97.3 - 98.9
Iron, Fe0.60 - 1
Silicon, Si0.50 - 0.90
Manganese, Mn≤ 0.20
Zinc, Zn≤ 0.10
Copper, Cu≤ 0.10
Titanium, Ti≤ 0.080
Chromium, Cr≤ 0.050
Magnesium, Mg≤ 0.050
Remainder (each)≤ 0.050
Remainder (total)≤ 0.15
Request
Callback


Additional Information:

  • Item Code: Aluminum_Alloys_8011_40800-RoundBar
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloys 7075 DTD-5124 755 Al-Zn 6 Mg Cu - Round Bar

Aluminum Alloys 7075 DTD-5124 755 Al-Zn 6 Mg Cu - Round Bar
  • Aluminum Alloys 7075 DTD-5124 755 Al-Zn 6 Mg Cu - Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Application Manufacturing, Construction, School/College Workshop
Single Piece Length36 meter, 6 meter, >36 meter, 18 meter, 3 meter
Thickness/Diameter2-3 inch, 0-1 inch, 3-4 inch, 1-2 inch, >4 inch
BrandIMPORTED
Black6000

Introduction

Aluminum alloys have strong corrosion resistance. At subzero temperatures, their strength increases, thus making them a useful low-temperature alloy. Their strength decreases if they are subjected to very high temperatures. The aluminum 7075 alloy has high strength.

The following datasheet gives more details about the aluminum 7075 alloy.

Chemical Composition

The following table shows the chemical composition of the aluminum 7075 alloy.

ElementContent (%)
Aluminum, Al90
Zinc, Zn5.6
Magnesium, Mg2.5
Copper, Cu1.6
Chromium, Cr0.23
Physical Properties

The physical properties of aluminum 7075 alloy are tabulated below.

PropertiesMetricImperial
Density2.8 g/cm30.101 lb/in3
Melting point483°C900°F
Mechanical Properties

The mechanical properties of aluminum 7075 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength220 MPa31909 psi
Yield strength95 MPa13779 psi
Shear strength150 MPa21756 psi
Fatigue strength160 MPa23206 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Elongation at break17%17%
Hardness6060
Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_7075_DTD-5124_755-RoundBar
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As per Request..
Yes! I am Interested

Aluminum Alloys 6101 63401 91E D50S E.Al.Mg.Si0.5 - Round Bar

Aluminum Alloys 6101 63401 91E D50S E.Al.Mg.Si0.5 - Round Bar
  • Aluminum Alloys 6101 63401 91E D50S E.Al.Mg.Si0.5 - Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
BrandIMPORTED
UsageHousehold Repair, Construction, Manufacturing
Size5 TO 500MM DIA
Single Piece Length36 meter, >36 meter, 18 meter, 3 meter, 6 meter
Blue4000

Introduction

Aluminium / Aluminum alloys have good corrosion resistance. The strength of these alloys can be reduced when they are exposed to high temperatures. However, their strength can be increased at subzero temperatures. Aluminium / Aluminum 6101 alloy has good mechanical strength and high electrical conductivity.

The following datasheet will discuss in detail about Aluminium / Aluminum 6101 alloy.

Chemical Composition

The following table shows the chemical composition of Aluminium / Aluminum 6101 alloy.

ElementContent (%)
Aluminium / Aluminum, Al98.9
Magnesium, Mg0.60
Silicon, Si0.50
Physical Properties

The physical properties of Aluminium / Aluminum 6101 alloy are given in the following table.

PropertiesMetricImperial
Density2.7 g/cm30.0975 lb/in3
Melting point588°C1090°F
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 6101 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength97 MPa14069 psi
Yield strength76 MPa11023 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Thermal Properties

The thermal properties of Aluminium / Aluminum 6101 alloy are given in the following table.

PropertiesConditions
T (ºC)Treatment
Thermal expansion23 (10-6/ºC)20-100-
Thermal conductivity218 W/mK25T6
Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_6101_63401_91E_D50S-RoundBar
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloy 3004 - Round Bar Sheet Pipe Wire Forged Block

Aluminum Alloy 3004 - Round Bar Sheet Pipe Wire Forged Block
  • Aluminum Alloy 3004 - Round Bar Sheet Pipe Wire Forged Block
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Dimensions (l x b x h)5 TO 500MM
AnodisedNo
Weight50 TO 500MM
Red6500

Introduction

Aluminium / Aluminum alloys have high corrosion resistance. Their strength can be reduced when they are exposed to high temperatures. However, their strength can be increased at subzero temperatures. Aluminium / Aluminum 3004 alloy is an alloy containing manganese and magnesium.

The following datasheet gives more details about Aluminium / Aluminum 3004 alloy.

Chemical Composition

The following table shows the chemical composition of Aluminium / Aluminum 3004 alloy.

ElementContent (%)
Aluminium / Aluminum , Al97.8
Manganese, Mn1.2
Magnesium, Mg1
Physical Properties

The physical properties of Aluminium / Aluminum 3004 alloy are tabulated below.

PropertiesMetricImperial
Density2.6-2.8 g/cm30.0939- 0.101 lb/in3
Melting point633°C1170°F
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 3004 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength215 MPa31183 psi
Yield strength170 MPa24656 psi
Shear strength115 MPa16680 psi
Fatigue strength105 MPa15229 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Elongation10%10%
Hardness5252
Request
Callback


Additional Information:

  • Item Code: AluminumAlloy_3004-RoundBar_Sheet_Pipe_Wire_ForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request
Yes! I am Interested

Aluminum Alloys 6351 64430 H30 Al-Mg-Si 1 B51S - Wire

Aluminum Alloys 6351 64430 H30 Al-Mg-Si 1  B51S - Wire
  • Aluminum Alloys 6351 64430 H30 Al-Mg-Si 1  B51S - Wire
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
TypeNickel Wire
Grade1000 Series
Thickness0.2mm-5mm

Introduction

Aluminum alloys tend to lose their strength when they are exposed to temperatures of about 200-250°C. However, their strength increases at subzero temperatures. They have high corrosion resistance.

The following datasheet will discuss in detail about the aluminum 6351 alloy.

Chemical Composition

The chemical composition of the aluminum 6351 alloy is tabulated below.

ElementContent (%)
Aluminum, Al97.8
Silicon, Si1
Manganese, Mn0.6
Magnesium, Mg0.6
Physical Properties

The following table shows the physical properties of the aluminum 6351 alloy.

PropertiesMetricImperial
Density2.6-2.8 g/cc0.0939- 0.101 lb/in3
Mechanical Properties

The mechanical properties of the aluminum 6351 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength250 MPa36260 psi
Yield strength150 MPa21756 psi
Shear strength200 MPa29008 psi
Fatigue strength90 MPa13054 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.0330.033
Elongation20%20%
Hardness9595
Request
Callback
Yes! I am Interested

Aluminum Alloys 6061 65032 H20 Al-Mg-Si Cu - Sheet

Aluminum Alloys 6061 65032 H20 Al-Mg-Si Cu - Sheet
  • Aluminum Alloys 6061 65032 H20 Al-Mg-Si Cu - Sheet
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Thickness0.2mm-5mm
Grade1000 Series
TypePlate

Aluminium alloy 6061 is one of the most extensively used of the 6000 series aluminium alloys. It is a versatile heat treatable extruded alloy with medium to high strength capabilities.

Composition

Table 1. Typical composition of aluminium alloy 6061

Component

Amount (wt.%)

Aluminium

Balance

Magnesium

0.8-1.2

Silicon

0.4 – 0.8

Iron

Max. 0.7

Copper

0.15-0.40

Zinc

Max. 0.25

Titanium

Max. 0.15

Manganese

Max. 0.15

Chromium

0.04-0.35

Others

0.05

Key Properties

Typical properties of aluminium alloy 6061 include:

•         Medium to high strength

•         Good toughness

•         Good surface finish

•         Excellent corrosion resistance to atmospheric conditions

•         Good corrosion resistance to sea water

•         Can be anodized

•         Good weldability and brazability

•         Good workability

•         Widely available

Physical Properties

Density: 2.7 g/cm3

Melting Point: Approx 580°C

Modulus of Elasticity: 70-80 GPa

Poissons Ratio: 0.33

Mechanical Properties

Temper

Ultimate Tensile Strength (MPa)

0.2% Proof Stress (MPa)

Brinell Hardness (500kg load, 10mm ball)

Elongation 50mm dia (%)

0

110-152

65-110

30-33

14-16

T1

180

95-96

 

16

T4

179 min

110 min

 

 

T6

260-310

240-276

95-97

9-13

Thermal Properties

Co-Efficient of Thermal Expansion (20-100°C): 23.5x10-6 m/m.°C

Thermal Conductivity: 173 W/m.K

 

Request
Callback
Yes! I am Interested

Aluminum Alloy 1100 Round Bar

Aluminum Alloy 1100 Round Bar
  • Aluminum Alloy 1100 Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
MaterialAluminium
Thickness 0.2mm-5mm
Width100mm--1000mm

Aluminium alloy 1050 is a popular grade of aluminium for general sheet metal work where moderate strength is required.

 

 

Aluminium alloy 1050 is known for its excellent corrosion resistance, high ductility and highly reflective finish.

Chemical Composition of Aluminium Alloy 1050

Table 1. Chemical composition for aluminium alloy 1050

Element% Present
Cu0-0.05
Mg0-0.05%
Si0-0.25%
Fe0-0.4%
Mn0-0.05%
Zn0-0.07%
Ti0-0.05%
AlBalance
Properties of Aluminium Alloy 1050Mechanical Properties of Aluminium Alloy 1050

Table 2. Mechanical properties for aluminium alloy 1050 H14

BS EN 485-2:2008
Sheet
0.2mm to 6.00mm
PropertyValue
Proof Stress85 Min MPa
Tensile Strength105 - 145 MPa
Hardness Brinell34 HB
Elongation A12 Min %
Request
Callback
Yes! I am Interested

Aluminum Alloy 3005 Round Bar

Aluminum Alloy 3005 Round Bar
  • Aluminum Alloy 3005 Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Grade6000 Series
MaterialAluminium
Surface Treatment Coated, Painted, Hot Rolled

Aluminum Alloy 3005 Round Bar Sheet Pipe Wire Forged Block

Introduction

Aluminium / aluminum 3000 series alloys provide a wide range of mechanical properties coupled with excellent corrosion resistance, weldability and formability.

Aluminium/aluminum 3005 alloy is a non-heat treatable wrought alloy with manganese as the key alloying element.

The following datasheet will provide more details about aluminium / aluminum 3005 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 3005-T14 alloy.

ElementContent (%)
Aluminum, Al95.7 - 98.8
Manganese, Mn1- 1.5
Iron, Fe≤ 0.70
Silicon, Si≤ 0.60
Copper, Cu≤ 0.30
Zinc, Zn≤ 0.25
Magnesium, Mg0.20 - 0.60
Chromium, Cr≤ 0.10
Titanium, Ti≤ 0.10
Other (each)≤ 0.050
Other (total)≤ 0.15
Physical Properties

The physical properties of aluminium / aluminum 3005-T14 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.73 g/cm³0.0986 lb/in³
Melting point630 - 655°C1170 - 1210 °F
Mechanical Properties

The mechanical properties of aluminium / aluminum 3005-T14 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength180 MPa26100 psi
Yield strength165 MPa23900 psi
Elongation7%7%
Elastic modulus69 GPa10000 ksi
Shear strength110 MPa16000 psi
Hardness, Brinell (@load 500 kg; thickness 10.0 mm)4949
Request
Callback
Yes! I am Interested

Aluminum Alloys 6061 65032 H20 Al-Mg-Si Cu - Round Bar

Aluminum Alloys 6061 65032 H20 Al-Mg-Si Cu - Round Bar
  • Aluminum Alloys 6061 65032 H20 Al-Mg-Si Cu - Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Surface TreatmentCoated
Thickness 0-1 mm ,1-2 mm, 2-3 mm, 3-4 mm
Width15000mm,up to15000mm

Aluminium alloy 6061 is one of the most extensively used of the 6000 series aluminium alloys. It is a versatile heat treatable extruded alloy with medium to high strength capabilities.

Composition

Table 1. Typical composition of aluminium alloy 6061

Component

Amount (wt.%)

Aluminium

Balance

Magnesium

0.8-1.2

Silicon

0.4 – 0.8

Iron

Max. 0.7

Copper

0.15-0.40

Zinc

Max. 0.25

Titanium

Max. 0.15

Manganese

Max. 0.15

Chromium

0.04-0.35

Others

0.05

Key Properties

Typical properties of aluminium alloy 6061 include:

•         Medium to high strength

•         Good toughness

•         Good surface finish

•         Excellent corrosion resistance to atmospheric conditions

•         Good corrosion resistance to sea water

•         Can be anodized

•         Good weldability and brazability

•         Good workability

•         Widely available

Physical Properties

Density: 2.7 g/cm3

Melting Point: Approx 580°C

Modulus of Elasticity: 70-80 GPa

Poissons Ratio: 0.33

Mechanical Properties

Temper

Ultimate Tensile Strength (MPa)

0.2% Proof Stress (MPa)

Brinell Hardness (500kg load, 10mm ball)

Elongation 50mm dia (%)

0

110-152

65-110

30-33

14-16

T1

180

95-96

 

16

T4

179 min

110 min

 

 

T6

260-310

240-276

95-97

9-13

Thermal Properties

Co-Efficient of Thermal Expansion (20-100°C): 23.5x10-6 m/m.°C

Request
Callback
Yes! I am Interested

Aluminum Alloy 5056 Round Bar

Aluminum Alloy 5056 Round Bar
  • Aluminum Alloy 5056 Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
MaterialAluminum
ApplicationIndustry and construction
ShapeSquare

Aluminum Alloy 5056 Round Bar Sheet Pipe Wire Forged Block
Introduction

Aluminum alloys contain have strong corrosion resistance characteristics and high electrical conductivity. These alloys obtain high strength when exposed to subzero temperatures and experience a decrease in strength when exposed toat high temperatures ranging between 200 and 250°C (392 and 482°F). Hence, Aaluminum alloys are known as good low-temperature alloys and are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F).

The following datasheet provides an overview of the aluminum 5056 alloy.

Chemical Composition

The chemical composition of the aluminum 5056 alloy is outlined in the following table.

ElementContent (%)
Aluminum, Al95.0
Magnesium, Mg5.0
Manganese, Mn0.12
Chromium, Cr0.12
Physical Properties

The following table shows the physical properties of the aluminum 5056 alloy.

PropertiesMetricImperial
Density2.64 g/cc0.0953 lb/in3
Mechanical Properties

The mechanical properties of the aluminum 5056 alloy are displayed in the following table.

PropertiesMetricImperial
Elastic modulus70-80 Gpa10152-11603 ksi
Poisson's ratio0.330.33
Thermal Properties

The thermal properties of the aluminum 5056 alloy are given in the following table.

PropertiesConditions
T (ºC)Treatment
Thermal expansion24.1 (10-6/ºC)20-100-
Thermal conductivity112 (W/mK)25H38
Request
Callback
Yes! I am Interested

Aluminum Alloy 5454 Round Bar

Aluminum Alloy 5454 Round Bar
  • Aluminum Alloy 5454 Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Thickness 0.2mm-200mm
ApplicationDecoration, Construction
Grade6000 Series

Introduction

Aluminum alloys contain strong corrosion resistance. These alloys are good low-temperature alloys. Aluminium / Aluminum alloys are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F). The strength of these alloys increases when exposed to subzero temperatures and the strength decreases when exposed to high temperatures.

The following datasheet provides an overview of Aluminium / Aluminum 5454 alloy.

Chemical Composition

The chemical composition of Aluminium / Aluminum 5454 alloy is outlined in the following table.

ElementContent (%)
Aluminium / Aluminum, Al96.3
Magnesium, Mg2.7
Chromium, Cr0.12
Manganese, Mn0.8
Physical Properties

The following table shows the physical properties of Aluminium / Aluminum 5454 alloy.

PropertiesMetricImperial
Density2.6-2.8 g/cm30.0939-0.1011 lb/in3
Melting point607°C1125°F
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 5454 alloy are displayed in the following table.

PropertiesMetricImperial
Elastic modulus70-80 GPa10152-11603 ksi
Poisson's ratio0.330.33
Request
Callback
Yes! I am Interested

Aluminum Alloy 5005 Round Bar

Aluminum Alloy 5005 Round Bar
  • Aluminum Alloy 5005 Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
MaterialAluminum
ApplicationIndustry and construction
Thickness0.2mm-5mm

Aluminium alloy 5005 contains nominally 0.8% magnesium. It has medium strength, good weldability, and good corrosion resistance in marine atmospheres. It also has the low density and excellent thermal conductivity common to all aluminium alloys. It is the most commonly used grade of aluminium in sheet and plate form.

Aluminium alloy 5005 is a lean aluminium magnesium alloy which can be hardened by cold work: it is not heat treatable to higher strength.

Austral Wright Metals can supply this alloy as plate, sheet and strip. See Austral Wright Metals Catalogue for normal stock sizes and tempers.

Corrosion Resistance of Aluminium Alloy 5005

Corrosion Resistance 5005 has the same high resistance to general corrosion as other non heat treatable aluminium alloys. It also has the higher resistance to slightly alkaline conditions common to the 5000 series alloys. The atmospheric corrosion resistance of 5005 is similar to that of 3003.

When anodised to improve corrosion resistance, the film on 5005 is clearer than on 3003, and gives better colour match with 6063 architectural extrusions.

The corrosion resistance of aluminium alloys relies on a protective surface oxide film, which when damaged is readily repaired by the rapid reaction between aluminium and oxygen. However, the high reactivity of the base metal can give rapid corrosion if the film cannot be repaired, so aluminium alloys are not suitable for use with reducing media.

Since aluminium is a reactive metal, it may corrode more quickly when in electrical contact with most other metals. The prediction of galvanic corrosion is complex, please consult Austral Wright Metals for specific advice.

Applications of Aluminium Alloy 5005

Typical Applications of aluminium alloy 5005 include:

•         Architectural applications

•         General sheet metal work

•         High strength foil.

Chemical Composition of Aluminium Alloy 5005

Table 1. Chemical composition of Aluminium 5005.

Element

%

Element

%

Aluminium

Balance

Manganese

0.20 max

Magnesium

0.50 – 1.10

Chromium

0.10 max

Silicon

0.30max

Zinc

0.25 max

Iron

0.07 max

Others, each

0.05 max

Copper

0.20 max

Others, total

0.15 max

Request
Callback
Yes! I am Interested

Aluminum Alloy 5086 Round Bar

Aluminum Alloy 5086 Round Bar
  • Aluminum Alloy 5086 Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Surface TreatmentMill Finished
Grade6000 Series
ApplicationIndustry and construction

Introduction

Aluminium / Aluminum alloys have strong corrosion resistance characteristics and high electrical conductivity. These alloys are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F) and tend to lose their strength. They are good low-temperature alloys and gain strength when exposed to subzero temperatures.

Aluminium / Aluminum 5086 alloy is a high strength structural alloy. The following datasheet provides an overview of Aluminium / Aluminum 5086 alloy.

Chemical Composition

The chemical composition of Aluminium / Aluminum 5086 alloy is outlined in the following table.

ElementContent (%)
Al95.4
Mg4.0
Cr0.15
Mn0.4
Physical Properties

The following table shows the physical properties of Aluminium / Aluminum 5086 alloy.

PropertiesMetricImperial
Density2.65 g/cm30.0957 lb/in3
Melting point588°C1090°F
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 5086 alloy are displayed in the following table.

PropertiesMetricImperial
Elastic modulus70-80 GPa10152-11603 ksi
Poisson's ratio0.330.33
Thermal Properties

The thermal properties of  Aluminium / Aluminum 5086 alloy are given in the following table.

PropertiesConditions
T (ºC)Treatment
Thermal expansion23.9 (10-6/ºC)20-100-
Thermal conductivity127 (W/mK)25All
Request
Callback
Yes! I am Interested

Aluminum Alloy 5754 Round Bar Sheet Pipe Wire Forged Block

Aluminum Alloy 5754  Round Bar Sheet Pipe Wire Forged Block
  • Aluminum Alloy 5754  Round Bar Sheet Pipe Wire Forged Block
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Thickness0.2mm-5mm
Grade1000 Series
Surface Treatment Coated

Aluminium 5754 has excellent corrosion resistance especially to seawater and industrially polluted atmospheres.

 

 

It has higher strength than 5251. This high strength makes Aluminium 5754 highly suited to flooring applications.

After rolling, Aluminium 5754 spontaneously softens until it reaches a stable condition.

Chemical Composition of Aluminium 5754

Table 1. Chemical composition for aluminium alloy 5754

Element% Present
Si0.4
Fe0.4
Mn0.5
Mg2.6-3.2
AlBalance
Properties of Aluminium 5754Mechanical Properties of Aluminium 5754

Table 2 (a). Mechanical properties for aluminium alloy 5754 H111 Treadplate

BS EN 485-2:2008
Sheet
0.2mm to 6.00mm
PropertyValue
Proof Stress60 Min MPa
Tensile Strength160 - 200 MPa
Elongation A50 mm12 Min %
Hardness Brinell44 HB

*Properties above are for material in the H111 condition.
Some thicknesses have a slightly higher minimum elongation requirement.

Table 2 (b). Mechanical properties for aluminium alloy 5754 H114

BS EN 485-2:2008
Aluminium Sheet
0.2mm to 6.00mm
PropertyValue
Proof Stress80 Min MPa
Tensile Strength190 - 260 MPa
Elongation A50 mm12 Min %
Hardness Brinell52 HB

*Properties above are for material in the H114 condition

Table 2 (c). Mechanical properties for aluminium alloy 5754 H22

BS EN 485-2:2008
Sheet Plate
0.2mm to 40mm
PropertyValue
Proof Stress130 Min MPa
Tensile Strength220 - 270 MPa
Elongation A50 mm7 Min %
Hardness Brinell63 HB
Request
Callback
Yes! I am Interested

Aluminum Alloys 6351 64430 H30 Al-Mg-Si1 B51S - Forged Block

Aluminum Alloys 6351 64430 H30 Al-Mg-Si1 B51S - Forged Block
  • Aluminum Alloys 6351 64430 H30 Al-Mg-Si1 B51S - Forged Block
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
BrandIMPORTED
Size5 TO 500MM
Black6000

Introduction

Aluminum alloys tend to lose their strength when they are exposed to temperatures of about 200-250°C. However, their strength increases at subzero temperatures. They have high corrosion resistance.

The following datasheet will discuss in detail about the aluminum 6351 alloy.

Chemical Composition

The chemical composition of the aluminum 6351 alloy is tabulated below.

ElementContent (%)
Aluminum, Al97.8
Silicon, Si1
Manganese, Mn0.6
Magnesium, Mg0.6
Physical Properties

The following table shows the physical properties of the aluminum 6351 alloy.

PropertiesMetricImperial
Density2.6-2.8 g/cc0.0939- 0.101 lb/in3
Mechanical Properties

The mechanical properties of the aluminum 6351 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength250 MPa36260 psi
Yield strength150 MPa21756 psi
Shear strength200 MPa29008 psi
Fatigue strength90 MPa13054 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.0330.033
Elongation20%20%
Hardness9595
Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_6351_64430-ForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloys 6063 63400 H9 Al-Mg-Si 0.5 - Wire

Aluminum Alloys 6063 63400 H9 Al-Mg-Si 0.5 - Wire
  • Aluminum Alloys 6063 63400 H9 Al-Mg-Si 0.5 - Wire
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Red6000

Background

Aluminium alloy 6063 is a medium strength alloy commonly referred to as an architectural alloy. It is normally used in intricate extrusions.

 

 

It has a good surface finish, high corrosion resistance, is readily suited to welding and can be easily anodised. Most commonly available as T6 temper, in the T4 condition it has good formability.

Applications of 6063 Aluminium

Aluminium alloy 6063 is used in:

  • Architectural applications
  • Extrusions
  • Window frames
  • Doors
  • Shop fittings
  • Irrigation tubing

In balustrading the rails and posts are normally in the T6 temper and formed elbows and bends are T4. T4 temper 6063 aluminium is also finding applications in hydroformed tube for chassis.

Alloy Designations

Aluminium alloy 6063/6063A also corresponds to the following standard designations and specifications:

  • AA6063
  • Al Mg0.7Si
  • GS10
  • AlMgSi0.5
  • A-GS
  • 3.32206
  • ASTM B210
  • ASTM B221
  • ASTM B241 (Pipe- Seamless)
  • ASTM B345 (Pipe- Seamless)
  • ASTM B361
  • ASTM B429
  • ASTM B483
  • ASTM B491
  • MIL G-18014
  • MIL G-18015
  • MIL P-25995
  • MIL W-85
  • QQ A-200/9
  • SAE J454
  • UNS A96063
  • HE19
Chemical Composition of 6063/6063A Aluminium

Table 1. Chemical composition for aluminium alloy 6063 and 6063A

Element6063 % Present6063A % Present
Si0.2 to 0.60.3 to 0.6
Fe0.0 to 0.350.15 to 0.35
Cu0.0 to 0.10.1
Mn0.0 to 0.10.15
Mg0.45 to 0.90.6 to 0.9
Zn0.0 to 0.10.0 to 0.15
Ti0.0 to 0.10.1
Cr0.1 max0.05
AlBalanceBalance
Tempers for 6063 Aluminium

The most common tempers for 6063 aluminium are:

  • Annealed wrought alloy
  • T4 – Solution heat treated and naturally aged
  • T6 – Solution heat treated and artificially aged
Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_6063_63400_H9-Wire
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloy 3003 - Round Bar Sheet Pipe Wire Forged Block

Aluminum Alloy 3003 - Round Bar Sheet Pipe Wire Forged Block
  • Aluminum Alloy 3003 - Round Bar Sheet Pipe Wire Forged Block
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Dimensions (l x b x h)5 TO 500MM
Weight50 TO 500Kg
Red5200

Introduction

Aluminum / Aluminium alloys have high ductility and corrosion resistance. Aluminum / Aluminium 3003 alloy has moderate strength and good corrosion resistance. The strength of this alloy can be increased by cold working.

The following datasheet gives an overview of Aluminum / Aluminium 3003 alloy.

Chemical Composition

The following table shows the chemical composition of Aluminum / Aluminium 3003 alloy.

ElementContent (%)
Aluminum, Al98.6
Manganese, Mn1.2
Copper, Cu0.12
Physical Properties

The physical properties of the Aluminum / Aluminium 3003 alloy are tabulated below.

PropertiesMetricImperial
Density2.73 g/cm30.0939 lb/in3
Melting point644°C1190°F
Mechanical Properties

The mechanical properties of the Aluminum / Aluminium 3003 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength130 MPa18855 psi
Yield strength125 MPa18130 psi
Shear strength83 MPa12039 psi
Fatigue strength55 MPa7977 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Elongation10%10%
Hardness3535
Thermal Properties

The thermal properties of the Aluminum / Aluminium 3003 alloy are given in the following table.

PropertiesConditions
T (ºC)Treatment
Thermal expansion co-efficient23.2 (10-6/ºC)20-100-
Thermal conductivity162 W/mK25H12
Request
Callback


Additional Information:

  • Item Code: AluminumAlloy_3003-RoundBar_Sheet_Pipe_Wire_ForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloy 5083 - Round Bar Sheet Pipe Wire Forged Block

Aluminum Alloy 5083 - Round Bar Sheet Pipe Wire Forged Block
  • Aluminum Alloy 5083 - Round Bar Sheet Pipe Wire Forged Block
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Weight50 TO 500Kg
Dimensions (l x b x h)5 TO 500MM
Black4000

Aluminium 5083 is known for exceptional performance in extreme environments. Aluminium 5083 is highly resistant to attack by both seawater and industrial chemical environments.

 

 

Aluminium 5083 also retains exceptional strength after welding. It has the highest strength of the non-heat treatable alloys but is not recommended for use in temperatures in excess of 65°C.

Chemical Composition of Aluminium Alloy 5083

Table 1. Chemical composition for aluminium alloy 5083

Element% Present
Si0.4
Fe0.4
Cu0.1
Mn0.4-1.0
Mg4.0-4.9
Zn0.25
Ti0.15
Cr0.05-0.25
AlBalance
Properties of Aluminium Alloy 5083Mechanical Properties of Aluminium Alloy 5083

Table 2 (a). Mechanical properties for aluminium alloy 5083 Soft O/H111

BS EN 485-2:2008
Sheet
0.2 - 6.3mm Thick
PropertyValue
Proof Stress125 Min MPa
Tensile Strength275 - 350 MPa
Hardness Brinell75 HB
Request
Callback


Additional Information:

  • Item Code: AluminumAlloy_5083-RoundBar_Sheet_Pipe_Wire_ForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloy 2014 - Round Bar Sheet Pipe Wire Forged Block

Aluminum Alloy 2014 - Round Bar Sheet Pipe Wire Forged Block
  • Aluminum Alloy 2014 - Round Bar Sheet Pipe Wire Forged Block
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Red4000

Introduction

Aluminium / Aluminum alloys have strong corrosion resistance characteristics and high electrical conductivity. The strength of these alloys increase at subzero temperatures and strength is lost when these alloys are exposed to high temperatures. Aluminium / Aluminum alloys are good low-temperature alloys and are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F).

The following datasheet provides an overview of Aluminium / Aluminum 2014 alloy.

Chemical Composition

The chemical composition of Aluminium / Aluminum 2014 alloy is outlined in the following table.

ElementContent (%)
Aluminium / Aluminum, Al93.5
Copper, Cu4.4
Silicon, Si0.8
Magnesium, Mg0.5
Cromium, Cr
0.1 (Max)
Manganese, Mn
0.6
Physical Properties

The following table shows the physical properties of Aluminium / Aluminum 2014 alloy.

PropertiesMetricImperial
Density2.8 g/cm30.1018 lb/in3
Melting point510°C950°F
Mechanical Properties

The mechanical properties of Aluminium / Aluminum 2014 alloy are displayed in the following table.

PropertiesMetricImperial
Elastic modulus70-80 GPa10152-11603 ksi
Poisson's ratio0.330.33
Request
Callback


Additional Information:

  • Item Code: AluminumAlloy_2014-RoundBar_Sheet_Pipe_Wire_ForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloys 6061 65032 H20 Al-Mg-Si Cu - Wire

Aluminum Alloys 6061 65032 H20 Al-Mg-Si Cu - Wire
  • Aluminum Alloys 6061 65032 H20 Al-Mg-Si Cu - Wire
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Blue6000

Aluminium alloy 6061 is one of the most extensively used of the 6000 series aluminium alloys. It is a versatile heat treatable extruded alloy with medium to high strength capabilities.

Composition

Table 1. Typical composition of aluminium alloy 6061

Component

Amount (wt.%)

Aluminium

Balance

Magnesium

0.8-1.2

Silicon

0.4 – 0.8

Iron

Max. 0.7

Copper

0.15-0.40

Zinc

Max. 0.25

Titanium

Max. 0.15

Manganese

Max. 0.15

Chromium

0.04-0.35

Others

0.05

 

Key Properties

Typical properties of aluminium alloy 6061 include:

• Medium to high strength

• Good toughness

• Good surface finish

• Excellent corrosion resistance to atmospheric conditions

• Good corrosion resistance to sea water

• Can be anodized

• Good weldability and brazability

• Good workability

• Widely available

Note: Property data is provided below, but should be used a guide only. As data may vary between manufacturers, you should consult your supplier for more exact figures.

Physical Properties

Density: 2.7 g/cm3

Melting Point: Approx 580°C

Modulus of Elasticity: 70-80 GPa

Poissons Ratio: 0.33

Mechanical Properties

Temper

Ultimate Tensile Strength (MPa)

0.2% Proof Stress (MPa)

Brinell Hardness (500kg load, 10mm ball)

Elongation 50mm dia (%)

0

110-152

65-110

30-33

14-16

T1

180

95-96

 

16

T4

179 min

110 min

 

 

T6

260-310

240-276

95-97

9-13

Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_6061_65032-Wire
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloy 4047 - Round Bar Sheet Pipe Wire Forged Block

Aluminum Alloy 4047 - Round Bar Sheet Pipe Wire Forged Block
  • Aluminum Alloy 4047 - Round Bar Sheet Pipe Wire Forged Block
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Black4000

Introduction

Aluminium / aluminum is widely used in several commercial, transportation and building applications. One of the key benefits of this silverfish white metal is its excellent corrosion resistance. Aluminum is also light weight, relatively strong, and has good thermal and electrical conduction.

Aluminium / aluminum 4047 alloy is a non-heat treatable wrought alloy type with good corrosion resistance. It is a filler alloy, and is quite similar to aluminium / aluminum 4043 except for the higher silicon content in aluminium / aluminum 4047 alloy. The higher silicon content provides improved fluidity during welding process with smooth finishes, as well as reduced shrinkage. It is suitable for elevated temperature operations.

The following datasheet will provide more details about aluminium / aluminum 4047 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 4047 alloy.

ElementContent (%)
Silicon, Si11-13
Iron, Fe0.80 max
Copper, Cu0.30 max
Zinc, Zn0.20 max
Manganese, Mn0.15 max
Magnesium, Mg0.10 max
Remainder (each)0.05
Remainder (total)0.15
Aluminum, AlRemainder
Physical Properties

The physical properties of aluminium / aluminum 4047 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.6 g/cm30.096 lb/in3
Other Designations

Equivalent materials to the aluminium / aluminum 4047 alloy are AMS 4185 and ANSI/AWS A5.10 (ER R).

Applications

Aluminium / aluminum 4047 alloy is chiefly used in the following areas:

  • Laser welded covers for microwave integrated circuits
  • Housing
  • Welding filler wires
  • Liners
  • Leak-tight joints
Request
Callback


Additional Information:

  • Item Code: AluminumAlloy_4047-RoundBar_Sheet_Pipe_Wire_ForgedBlock
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloys 8011 40800 Al-Fe-Si - Wire

Aluminum Alloys 8011 40800 Al-Fe-Si - Wire
  • Aluminum Alloys 8011 40800 Al-Fe-Si - Wire
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Black5000

Introduction

Apart from iron, aluminium / aluminum is currently the next most widely used metal in the world. This is due to the fact that aluminium / aluminum has a unique combination of attractive properties. Properties such as its low weight, corrosion resistance, and easy maintenance of final product, have ensured that this metal and its alloys will be in use for a very long time.

Aluminium / aluminum 8011 alloy is a wrought alloy. The following datasheet will provide more details about aluminium / aluminum 8011 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 8011 alloy.

ElementContent (%)
Aluminum, Al97.3 - 98.9
Iron, Fe0.60 - 1
Silicon, Si0.50 - 0.90
Manganese, Mn≤ 0.20
Zinc, Zn≤ 0.10
Copper, Cu≤ 0.10
Titanium, Ti≤ 0.080
Chromium, Cr≤ 0.050
Magnesium, Mg≤ 0.050
Remainder (each)≤ 0.050
Remainder (total)≤ 0.15
Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_8011_40800-Wire
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloys 7075 DTD-5124 755 Al-Zn 6 Mg Cu - Wire

Aluminum Alloys 7075 DTD-5124 755 Al-Zn 6 Mg Cu - Wire
  • Aluminum Alloys 7075 DTD-5124 755 Al-Zn 6 Mg Cu - Wire
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Blue6000

Introduction

Aluminum alloys have strong corrosion resistance. At subzero temperatures, their strength increases, thus making them a useful low-temperature alloy. Their strength decreases if they are subjected to very high temperatures. The aluminum 7075 alloy has high strength.

The following datasheet gives more details about the aluminum 7075 alloy.

Chemical Composition

The following table shows the chemical composition of the aluminum 7075 alloy.

ElementContent (%)
Aluminum, Al90
Zinc, Zn5.6
Magnesium, Mg2.5
Copper, Cu1.6
Chromium, Cr0.23
Physical Properties

The physical properties of aluminum 7075 alloy are tabulated below.

PropertiesMetricImperial
Density2.8 g/cm30.101 lb/in3
Melting point483°C900°F
Mechanical Properties

The mechanical properties of aluminum 7075 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength220 MPa31909 psi
Yield strength95 MPa13779 psi
Shear strength150 MPa21756 psi
Fatigue strength160 MPa23206 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Elongation at break17%17%
Hardness6060
Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_7075_DTD-5124_755-Wire
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloys 6082 Al-Mg-Si 1 - Plate

Aluminum Alloys 6082  Al-Mg-Si 1 - Plate
  • Aluminum Alloys 6082  Al-Mg-Si 1 - Plate
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Width100mm, 1000mm
Thickness0.2mm-5mm
TypePlate

 

Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, Aluminium alloy 6082is the alloy most commonly used for machining.

As a relatively new alloy, the higher strength of Aluminium alloy 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.

In the T6 and T651 temper, Aluminium alloy 6082 machines well and produces tight coils of swarf when chip breakers are used.

Chemical Composition of Aluminium alloy 6082

Table 1. Chemical composition for aluminium alloy 6082

Element

% Present

Si

0.7-1.3

Fe

0.0-0.5

Cu

0.0-0.1

Mn

0.4-1.0

Mg

0.6-1.2

Zn

0.0-0.2

Ti

0.0-0.1

Cr

0.0-0.25

Al

Balance

Properties of Aluminium alloy 6082

Mechanical Properties of Aluminium alloy 6082

Table 2 (a). Mechanical properties for aluminium alloy 6082 Soft O

BS EN 485-2:2008
Sheet
0.4mm to 6.00mm

Property

Value

Proof Stress

85 Max MPa

Tensile Strength

150 Max MPa

Hardness Brinell

40 HB

 

Request
Callback


Additional Information:

  • Item Code: AluminumAlloys_6082_Sheet-Plate
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 MT per month
  • Delivery Time: 30 Day
  • Packaging Details: As Per Request..
Yes! I am Interested

Aluminum Alloy 1070 Round Bar

Aluminum Alloy 1070 Round Bar
  • Aluminum Alloy 1070 Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Grade6000 Series
ApplicationIndustry and construction
ShapeSquare

Introduction

Aluminium / aluminum is the second most widely used metal in the world today. It is a versatile metal that can be cast into any form. This lightweight metal can be welded, riveted, brazed, or resin bonded according to the requirement.

Aluminium / aluminum 1070 alloy is a wrought alloy type with good corrosion resistance. It is an excellent brazing alloy.

The following datasheet will provide more details about aluminium/ aluminum 1070 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium/aluminum 1070 alloy.

ElementContent (%)
Aluminum, Al≥ 99.7
Iron, Fe≤ 0.25
Silicon, Si≤ 0.20
Zinc, Zn≤ 0.040
Vanadium, V≤ 0.050
Copper, Cu≤ 0.040
Titanium, Ti≤ 0.030
Magnesium, Mg≤ 0.030
Manganese, Mn≤ 0.030
Other (each)≤ 0.030
Physical Properties

The physical properties of aluminium/aluminum 1070 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.70 g/cm30.0975 lb/in3
Mechanical Properties

The mechanical properties of aluminium / aluminum 1070-O alloy are tabulated below.

PropertiesMetricImperial
Tensile strength95 MPa13778 psi
Applications

Aluminium / aluminum 1070 alloy is chiefly used in the following areas:

  • General industrial components
  • Building and construction
  • Transport
  • Electrical material
  • PS plates
  • Strips for ornaments
  • Communication cables
  • Refrigerator and freezer cabinets
  • For joining two pieces of aluminium / aluminum.
Request
Callback
Yes! I am Interested

Aluminum Alloy 2618 Round Bar

Aluminum Alloy 2618 Round Bar
  • Aluminum Alloy 2618 Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
Surface Treatment Coated, Painted, Hot Rolled
Thickness0.2mm-5mm
Grade1000 Series

Introduction

Aluminium / Aluminum alloys have high ductility and corrosion resistance. At subzero temperatures, their strength can be increased. However, their strength can be reduced at high temperatures of about 200-250°C. Aluminium / Aluminum 2618 alloy is an age hardenable alloy containing magnesium and copper.

The datasheet given below gives details about Aluminium / Aluminum 2618 alloy.

Chemical Composition

The following table shows the chemical composition of Aluminium / Aluminum 2618 alloy.

ElementContent (%)
Aluminium / Aluminum, Al93.7
Copper, Cu2.30
Magnesium, Mg1.60
Iron, Fe1.1
Nickel, Ni1.0
Silicon, Si0.18
Titanium, Ti0.07
Physical Properties

The physical properties of the Aluminium / Aluminum 2618 alloy are tabulated below.

PropertiesMetricImperial
Density2.6-2.8 g/cm30.0939- 0.101 lb/in3
Melting point510°C950°F
Mechanical Properties

The mechanical properties of the Aluminium / Aluminum 2618 alloy are outlined in the following table.

PropertiesMetricImperial
Tensile strength440 MPa63817 psi
Yield strength370 MPa53664 psi
Shear strength260 MPa37709 psi
Fatigue strength125 MPa18130 psi
Elastic modulus70-80 GPa10153-11603 ksi
Poisson's ratio0.330.33
Elongation10%10%
Thermal Properties

The thermal properties of the Aluminium / Aluminum 2618 alloy are given in the following table.

PropertiesMetricImperial
Thermal conductivity (@25°C/77°F) with T61 treatment
146 W/mK1013 BTU in/hr.ft².°F

Request
Callback
Yes! I am Interested

Aluminum Alloy 4043 Round Bar

Aluminum Alloy 4043 Round Bar
  • Aluminum Alloy 4043 Round Bar
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity50 Kilogram
ApplicationIndustry and construction
Grade6000 Series
Thickness0.2mm-350mm

Introduction

Aluminium / aluminum is found as a part of over 270 different minerals, making it the third most abundantly available element in the Earth’s crust.

Aluminium / aluminum alloys are used in several components and the list is increasing every year. Aluminium / aluminum 4043 alloy is a wrought alloy type with good corrosion resistance.

The following datasheet will provide more details about aluminium / aluminum 4043 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 4043 alloy.

ElementContent (%)
Aluminum, Al94.8
Silicon, Si5.20
Physical Properties

The physical properties of aluminium / aluminum 4043 alloy are outlined in the following table.

PropertiesMetricImperial
Density2.69 g/cm30.0972 lb/in3
Mechanical Properties

The mechanical properties of aluminium / aluminum 4043 alloy are tabulated below.

PropertiesMetricImperial
Tensile strength145 MPa21000 psi
Yield strength (@diameter 12.7 mm/0.500 in)70 MPa10200 psi
Poisson’s ratio0.340.34
Elongation at break (@diameter 12.7 mm/0.500 in)22%22%
Shear strength90 MPa13100 psi
Hardness, Brinell (@load 500 kg; thickness 10.0 mm/1100 lb)3939
Thermal Properties

The thermal properties of aluminium / aluminum 4043 alloy are tabulated below.

PropertiesMetricImperial
Thermal expansion co-efficient (average over 20-100°C/68-212°F)22.1 µm/m°C12.3 µin/in°F
Thermal conductivity163 W/mK1130 BTU in/hr.ft².°F
Other Designations

Equivalent materials to the aluminium / aluminum 4043 alloy are listed below:

  • BS N21
  • MIL-W-6712
  • Alcan GB-33S
  • Duricilium-FD
  • Star-Si-050
  • AWCO-45
Request
Callback
Yes! I am Interested
X

Explore more products



Reach Us
Anil Gupta (Sales Manager)
B-12A, Flox Chambers, Tata Road No. 1 Opera House
Mumbai- 400004, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS