Fountainhead Alloys
Opera House, Mumbai, Maharashtra
GST No. 27AKOPC9787G1ZI
TrustSEAL Verified
Call 08047643051 89% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 50 Kg |
| Grade | Al 6063/ 6063A/ 63400 H9 Al-Mg-Si 0.5 |
| Brand | FHA |
| Is It Anodised | Anodised |
| Finish | Bright Smooth Finish |
| Usage/Application | Construction |
| Tolerance | -0.00mm/+5.00mm |
| Material | Aluminium |
| Length | 6 meter |
| Standard | UNS A96063,GS10 |
Aluminium alloy 6063 is a medium strength alloy commonly referred to as an architectural alloy. It is normally used in intricate extrusions.
It has a good surface finish, high corrosion resistance, is readily suited to welding and can be easily anodised. Most commonly available as T6 temper, in the T4 condition it has good formability.
Aluminium alloy 6063 is used in:
In balustrading the rails and posts are normally in the T6 temper and formed elbows and bends are T4. T4 temper 6063 aluminium is also finding applications in hydroformed tube for chassis.
Aluminium alloy 6063/6063A also corresponds to the following standard designations and specifications:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Chemical composition for aluminium alloy 6063 and 6063A
| Element | 6063 % Present | 6063A % Present |
|---|---|---|
| Si | 0.2 to 0.6 | 0.3 to 0.6 |
| Fe | 0.0 to 0.35 | 0.15 to 0.35 |
| Cu | 0.0 to 0.1 | 0.1 |
| Mn | 0.0 to 0.1 | 0.15 |
| Mg | 0.45 to 0.9 | 0.6 to 0.9 |
| Zn | 0.0 to 0.1 | 0.0 to 0.15 |
| Ti | 0.0 to 0.1 | 0.1 |
| Cr | 0.1 max | 0.05 |
| Al | Balance | Balance |
The most common tempers for 6063 aluminium are:
Additional Information:
Product Details:
| Grade | Al2017 |
| Surface Finish | Finished Polished |
| Color | Silver |
| Diameter | 500 mm |
| Shape | Round |
| Material | Aluminium Alloy |
| Unit Length | 6 m |
| Brand | FHA |
Aluminium/aluminum and its alloys are essential materials in various industries such as aerospace, marine, construction, and automobile.
Aluminium/aluminum 2017 alloy is a heat treatable wrought alloy with intermediate strength. It is stronger than aluminium /aluminum 2011, but harder to machine. Workability is fair with ductility and formability better that aluminium / aluminum 2014. Arc and resistance weldability of this alloy are satisfactory while corrosion resistance is fair.
The following datasheet will provide more details about aluminium / aluminum 2017 alloy.
The following table shows the chemical composition of aluminium / aluminum 2017 alloy.
| Element | Content (%) |
|---|---|
| Aluminum, Al | 91.5 - 95.5 |
| Copper, Cu | 3.5 - 4.5 |
| Iron, Fe | 0.7 max |
| Manganese, Mn | 0.4 - 1 |
| Magnesium, Mg | 0.4 - 0.8 |
| Silicon, Si | 0.2 - 0.8 |
| Zinc, Zn | 0.25 max |
| Titanium, Ti | 0.15 max |
| Chromium, Cr | 0.1 max |
| Remainder (each) | 0.05 max |
| Remainder (total) | 0.15 max |
The physical properties of aluminium / aluminum 2017 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.79 g/cm³ | 0.101 lb/in³ |
| Melting point | 513-641°C | 955 - 1185°F |
The mechanical properties of aluminium / aluminum 2017 alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength (annealed) | 179 MPa | 26000 psi |
| Yield strength (annealed) | 69 MPa | 10000 psi |
| Elongation (annealed) | 22% | 22% |
| Elastic modulus | 72 GPa | 10500 ksi |
| Shear strength (annealed) | 124 MPa | 18000 psi |
Product Details:
| Minimum Order Quantity | 50 Kg |
| Material | Aluminium |
| Grade | Al 7020 |
| Single Piece Length | 6 meter |
| Is It Anodised | Anodised |
| Brand | FHA |
| Usage/Application | Construction |
| Diameter | 500 mm |
The principal alloying ingredients in aluminium / aluminum alloys include manganese, magnesium, copper, zinc and silicon. The market for aluminium / aluminum and its alloys is huge. About 22 million t is newly manufactured aluminium and 7 million t is recycled aluminium scrap.
Aluminium / aluminum 7020 alloy is a heat treatable wrought alloy. Zinc forms a major part of this alloy.
The following datasheet will provide more details about aluminium / aluminum 7020 alloy.
The following table shows the chemical composition of aluminium / aluminum 7020 alloy.
| Element | Content (%) |
|---|---|
| Zinc, Zn | 4-5 |
| Magnesium, Mg | 1-1.40 |
| Zirconium, Zr + Titanium, Ti | 0.80 - 0.25 |
| Iron, Fe | 0.4 |
| Silicon, Si | 0.35 |
| Copper, Cu | 0.2 |
| Chromium, Cr | 0.10 - 0.35 |
| Zirconium, Zr | 0.080 - 0.20 |
| Manganese, Mn | 0.050 - 0.50 |
| Other (each) | 0.05 max |
| Other (total) | 0.15 max |
| Aluminum, Al | Remainder |
The physical properties of aluminium / aluminum 7020 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.78 g/cm³ | 0.100 lb/in³ |
The mechanical properties of aluminium / aluminum 7020-T6 alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength (@thickness ≤100 mm/≤3.94 in) | ≥ 350 MPa | ≥ 50800 psi |
| Yield strength (@thickness ≤100 mm/≤3.94 in) | ≥ 280 MPa | ≥ 40600 psi |
| Elongation at break (@thickness ≤100 mm/≤3.94 in) | ≥ 10% | ≥ 10% |
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Shape | Round |
| Usage/Application | Construction |
| Material | Aluminum Alloy |
| Grade | Al 6201 64401 |
| Single Piece Length | 18 meter |
| Brand | FHA |
| Diameter | 500 mm |
Aluminum alloys are known for their strong corrosion resistance. They are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F). However, the strength of Aluminium / Aluminum alloys can be enhanced at subzero temperatures, thus making them perfect low-temperature alloys.
Aluminium / Aluminum 6201 alloy is a wrought alloy type. The following datasheet will provide more details about Aluminium / Aluminum 6201 alloy.
The following table shows the chemical composition of Aluminium / Aluminum 6201 alloy.
| Element | Content (%) |
|---|---|
| Aluminum, Al | 98.5 |
| Magnesium, Mg | 0.80 |
| Silicon, Si | 0.70 |
The physical properties of Aluminium / Aluminum 6201 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.6-2.8 g/cm3 | 0.0939-0.1011 lb/in³ |
The mechanical properties of Aluminium / Aluminum 6201 alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Elastic modulus | 70-80 GPa | 10152-11603 ksi |
| Poisson’s ratio | 0.33 | 0.33 |
Product Details:
| Minimum Order Quantity | 50 Kg |
| Material | Aluminium Alloy |
| Grade | Al 6101 |
| Single Piece Length | 6 meter |
| Brand | FHA |
| Usage/Application | Construction |
| Length | 6 meter |
| Diameter | 350 mm |
Aluminium / Aluminum alloys have good corrosion resistance. The strength of these alloys can be reduced when they are exposed to high temperatures. However, their strength can be increased at subzero temperatures. Aluminium / Aluminum 6101 alloy has good mechanical strength and high electrical conductivity.
The following datasheet will discuss in detail about Aluminium / Aluminum 6101 alloy.
The following table shows the chemical composition of Aluminium / Aluminum 6101 alloy.
| Element | Content (%) |
|---|---|
| Aluminium / Aluminum, Al | 98.9 |
| Magnesium, Mg | 0.60 |
| Silicon, Si | 0.50 |
The physical properties of Aluminium / Aluminum 6101 alloy are given in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.7 g/cm3 | 0.0975 lb/in3 |
| Melting point | 588°C | 1090°F |
The mechanical properties of Aluminium / Aluminum 6101 alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 97 MPa | 14069 psi |
| Yield strength | 76 MPa | 11023 psi |
| Elastic modulus | 70-80 GPa | 10153-11603 ksi |
| Poisson's ratio | 0.33 | 0.33 |
The thermal properties of Aluminium / Aluminum 6101 alloy are given in the following table.
| Properties | Conditions | ||
|---|---|---|---|
| T (ºC) | Treatment | ||
| Thermal expansion | 23 (10-6/ºC) | 20-100 | - |
| Thermal conductivity | 218 W/mK | 25 | T6 |
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Shape | Round |
| Usage/Application | Construction |
| Material | Aluminum Alloy |
| Grade | Al 6005 62400 C51S |
| Single Piece Length | 18 meter |
| Brand | FHA |
| Diameter | 350 mm |
Aluminium alloy 6005i s a medium strength, heat treatable alloy with excellent corrosion resistance.
Alloy 6005 has properties between those of alloys 6061 and 6082 and can sometimes be used interchangeably with these alloys but 6005/6005A has better extrusion characteristics. It has a better mill surface finish, but it is difficult to produce thin-wall complicated shapes in 6005/6005A. 6005 has very good bending properties.
Chemical Composition:
Chemical composition for aluminium alloy 6005
|
Element |
% Present |
|
Si |
0.5-0.9 |
|
Fe |
0.0-0.35 |
|
Cu |
0.0-0.3 |
|
Mn |
0.0-0.5 |
|
Mg |
0.4-0.7 |
|
Zn |
0.0-0.2 |
|
Ti |
0.0-0.1 |
|
Cr |
0.0-0.3 |
|
Mn+Cr |
0.12-0.5 |
|
Al |
Balance |
Mechanical Properties:
Mechanical properties for aluminium alloy 6005 T6
|
BS EN 755-2:2008 |
|
|
Property |
Value |
|
Proof Stress |
225 Min MPa |
|
Tensile Strength |
270 Min MPa |
|
Elongation A50 mm |
8 % |
|
Shear Strength |
205 MPa |
|
Hardness Brinell |
90 HB |
|
Elongation A |
10 Min % |
Product Details:
| Minimum Order Quantity | 50 Kg |
| Material | Aluminium Alloy |
| Grade | Al 6351 |
| Single Piece Length | 3 meter |
| Brand | FHA |
| Usage/Application | Construction |
| Diameter | 500 mm |
| Shape | Round |
Aluminum alloys tend to lose their strength when they are exposed to temperatures of about 200-250°C. However, their strength increases at subzero temperatures. They have high corrosion resistance.
The following datasheet will discuss in detail about the aluminum 6351 alloy.
The chemical composition of the aluminum 6351 alloy is tabulated below.
| Element | Content (%) |
|---|---|
| Aluminum, Al | 97.8 |
| Silicon, Si | 1 |
| Manganese, Mn | 0.6 |
| Magnesium, Mg | 0.6 |
The following table shows the physical properties of the aluminum 6351 alloy.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.6-2.8 g/cc | 0.0939- 0.101 lb/in3 |
The mechanical properties of the aluminum 6351 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 250 MPa | 36260 psi |
| Yield strength | 150 MPa | 21756 psi |
| Shear strength | 200 MPa | 29008 psi |
| Fatigue strength | 90 MPa | 13054 psi |
| Elastic modulus | 70-80 GPa | 10153-11603 ksi |
| Poisson's ratio | 0.033 | 0.033 |
| Elongation | 20% | 20% |
| Hardness | 95 | 95 |
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Material | Aluminum Alloy |
| Usage/Application | Construction |
| Brand | FHA |
| Grade | Al 5754 |
| Surface Treatment | Coated |
| Length | 12 meter |
| Diameter | 350 mm |
| Shape | Round |
Aluminium 5754 has excellent corrosion resistance especially to seawater and industrially polluted atmospheres.
It has higher strength than 5251. This high strength makes Aluminium 5754 highly suited to flooring applications.
After rolling, Aluminium 5754 spontaneously softens until it reaches a stable condition.
Chemical composition for aluminium alloy 5754
| Element | % Present |
|---|---|
| Si | 0.4 |
| Fe | 0.4 |
| Mn | 0.5 |
| Mg | 2.6-3.2 |
| Al | Balance |
Mechanical properties for aluminium alloy 5754 H111 Treadplate
| BS EN 485-2:2008 Sheet 0.2mm to 6.00mm |
|
|---|---|
| Property | Value |
| Proof Stress | 60 Min MPa |
| Tensile Strength | 160 - 200 MPa |
| Elongation A50 mm | 12 Min % |
| Hardness Brinell | 44 HB |
Mechanical properties for aluminium alloy 5754 H114
| BS EN 485-2:2008 Aluminium Sheet 0.2mm to 6.00mm |
|
|---|---|
| Property | Value |
| Proof Stress | 80 Min MPa |
| Tensile Strength | 190 - 260 MPa |
| Elongation A50 mm | 12 Min % |
| Hardness Brinell | 52 HB |
Mechanical properties for aluminium alloy 5754 H22
| BS EN 485-2:2008 Sheet Plate 0.2mm to 40mm |
|
|---|---|
| Property | Value |
| Proof Stress | 130 Min MPa |
| Tensile Strength | 220 - 270 MPa |
| Elongation A50 mm | 7 Min % |
| Hardness Brinell | 63 HB |
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Material | Aluminum Alloy |
| Usage/Application | Construction |
| Brand | FHA |
| Grade | Al 5454 |
| Diameter | 350 mm |
| Length | 18 meter |
Aluminum alloys contain strong corrosion resistance. These alloys are good low-temperature alloys. Aluminium / Aluminum alloys are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F). The strength of these alloys increases when exposed to subzero temperatures and the strength decreases when exposed to high temperatures.
The following datasheet provides an overview of Aluminium / Aluminum 5454 alloy.
The chemical composition of Aluminium / Aluminum 5454 alloy is outlined in the following table.
| Element | Content (%) |
|---|---|
| Aluminium / Aluminum, Al | 96.3 |
| Magnesium, Mg | 2.7 |
| Chromium, Cr | 0.12 |
| Manganese, Mn | 0.8 |
The following table shows the physical properties of Aluminium / Aluminum 5454 alloy.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.6-2.8 g/cm3 | 0.0939-0.1011 lb/in3 |
| Melting point | 607°C | 1125°F |
The mechanical properties of Aluminium / Aluminum 5454 alloy are displayed in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Elastic modulus | 70-80 GPa | 10152-11603 ksi |
| Poisson's ratio | 0.33 | 0.33 |
Product Details:
| Minimum Order Quantity | 50 Kg |
| Size | 5mm To 500mm Dia |
| Shape | Round |
| Material Grade | 5083 |
| Dimensions (l x b x h) | 3000mm |
| I Deal In | New Only |
| Brand | FHA |
Aluminium 5083 is known for exceptional performance in extreme environments. Aluminium 5083 is highly resistant to attack by both seawater and industrial chemical environments.
Aluminium 5083 also retains exceptional strength after welding. It has the highest strength of the non-heat treatable alloys but is not recommended for use in temperatures in excess of 65°C.
Chemical Composition of Aluminium Alloy 5083Table 1. Chemical composition for aluminium alloy 5083
| Element | % Present |
|---|---|
| Si | 0.4 |
| Fe | 0.4 |
| Cu | 0.1 |
| Mn | 0.4-1.0 |
| Mg | 4.0-4.9 |
| Zn | 0.25 |
| Ti | 0.15 |
| Cr | 0.05-0.25 |
| Al | Balance |
Table 2 (a). Mechanical properties for aluminium alloy 5083 Soft O/H111
| BS EN 485-2:2008 Sheet 0.2 - 6.3mm Thick | |
|---|---|
| Property | Value |
| Proof Stress | 125 Min MPa |
| Tensile Strength | 275 - 350 MPa |
| Hardness Brinell | 75 HB |
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Material | Aluminum Alloy |
| Usage/Application | Construction |
| Brand | FHA |
| Surface Treatment | Mill Finished |
| Grade | Al 5086 |
| Length | 18 meter |
| Diameter | 350 mm |
Aluminium / Aluminum alloys have strong corrosion resistance characteristics and high electrical conductivity. These alloys are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F) and tend to lose their strength. They are good low-temperature alloys and gain strength when exposed to subzero temperatures.
Aluminium / Aluminum 5086 alloy is a high strength structural alloy. The following datasheet provides an overview of Aluminium / Aluminum 5086 alloy.
The chemical composition of Aluminium / Aluminum 5086 alloy is outlined in the following table.
| Element | Content (%) |
|---|---|
| Al | 95.4 |
| Mg | 4.0 |
| Cr | 0.15 |
| Mn | 0.4 |
The following table shows the physical properties of Aluminium / Aluminum 5086 alloy.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.65 g/cm3 | 0.0957 lb/in3 |
| Melting point | 588°C | 1090°F |
The mechanical properties of Aluminium / Aluminum 5086 alloy are displayed in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Elastic modulus | 70-80 GPa | 10152-11603 ksi |
| Poisson's ratio | 0.33 | 0.33 |
The thermal properties of Aluminium / Aluminum 5086 alloy are given in the following table.
| Properties | Conditions | ||
|---|---|---|---|
| T (ºC) | Treatment | ||
| Thermal expansion | 23.9 (10-6/ºC) | 20-100 | - |
| Thermal conductivity | 127 (W/mK) | 25 | All |
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Material | Aluminum Alloy |
| Usage/Application | Construction |
| Grade | Al 4047 |
| Size/Diameter | 4 inch |
| Single Piece Length | 6 meter |
| Shape | Round |
| End | Plain End |
| Brand | FHA |
Aluminium / aluminum is widely used in several commercial, transportation and building applications. One of the key benefits of this silverfish white metal is its excellent corrosion resistance. Aluminum is also light weight, relatively strong, and has good thermal and electrical conduction.
Aluminium / aluminum 4047 alloy is a non-heat treatable wrought alloy type with good corrosion resistance. It is a filler alloy, and is quite similar to aluminium / aluminum 4043 except for the higher silicon content in aluminium / aluminum 4047 alloy. The higher silicon content provides improved fluidity during welding process with smooth finishes, as well as reduced shrinkage. It is suitable for elevated temperature operations.
The following datasheet will provide more details about aluminium / aluminum 4047 alloy.
The following table shows the chemical composition of aluminium / aluminum 4047 alloy.
| Element | Content (%) |
|---|---|
| Silicon, Si | 11-13 |
| Iron, Fe | 0.80 max |
| Copper, Cu | 0.30 max |
| Zinc, Zn | 0.20 max |
| Manganese, Mn | 0.15 max |
| Magnesium, Mg | 0.10 max |
| Remainder (each) | 0.05 |
| Remainder (total) | 0.15 |
| Aluminum, Al | Remainder |
The physical properties of aluminium / aluminum 4047 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.6 g/cm3 | 0.096 lb/in3 |
Aluminium / aluminum 4047 alloy is chiefly used in the following areas:
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Material | Aluminum Alloy |
| Usage/Application | Construction |
| Brand | FHA |
| Grade | Al 4043 |
| Length | 12 meter |
| Diameter | 500 mm |
Aluminium / aluminum is found as a part of over 270 different minerals, making it the third most abundantly available element in the Earth’s crust.
Aluminium / aluminum alloys are used in several components and the list is increasing every year. Aluminium / aluminum 4043 alloy is a wrought alloy type with good corrosion resistance.
The following datasheet will provide more details about aluminium / aluminum 4043 alloy.
The following table shows the chemical composition of aluminium / aluminum 4043 alloy.
| Element | Content (%) |
|---|---|
| Aluminum, Al | 94.8 |
| Silicon, Si | 5.20 |
The physical properties of aluminium / aluminum 4043 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.69 g/cm3 | 0.0972 lb/in3 |
The mechanical properties of aluminium / aluminum 4043 alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 145 MPa | 21000 psi |
| Yield strength (@diameter 12.7 mm/0.500 in) | 70 MPa | 10200 psi |
| Poisson’s ratio | 0.34 | 0.34 |
| Elongation at break (@diameter 12.7 mm/0.500 in) | 22% | 22% |
| Shear strength | 90 MPa | 13100 psi |
| Hardness, Brinell (@load 500 kg; thickness 10.0 mm/1100 lb) | 39 | 39 |
The thermal properties of aluminium / aluminum 4043 alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion co-efficient (average over 20-100°C/68-212°F) | 22.1 µm/m°C | 12.3 µin/in°F |
| Thermal conductivity | 163 W/mK | 1130 BTU in/hr.ft².°F |
Equivalent materials to the aluminium / aluminum 4043 alloy are listed below:
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Usage/Application | Construction |
| Brand | FHA |
| Material | Aluminium Alloy |
| Surface Treatment | Hot Rolled |
| Grade | Al 3005 |
| Length | 18 meter |
| Diameter | 350 mm |
Aluminium / aluminum 3000 series alloys provide a wide range of mechanical properties coupled with excellent corrosion resistance, weldability and formability.
Aluminium/aluminum 3005 alloy is a non-heat treatable wrought alloy with manganese as the key alloying element.
The following datasheet will provide more details about aluminium / aluminum 3005 alloy.
The following table shows the chemical composition of aluminium / aluminum 3005-T14 alloy.
| Element | Content (%) |
|---|---|
| Aluminum, Al | 95.7 - 98.8 |
| Manganese, Mn | 1- 1.5 |
| Iron, Fe | ≤ 0.70 |
| Silicon, Si | ≤ 0.60 |
| Copper, Cu | ≤ 0.30 |
| Zinc, Zn | ≤ 0.25 |
| Magnesium, Mg | 0.20 - 0.60 |
| Chromium, Cr | ≤ 0.10 |
| Titanium, Ti | ≤ 0.10 |
| Other (each) | ≤ 0.050 |
| Other (total) | ≤ 0.15 |
The physical properties of aluminium / aluminum 3005-T14 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.73 g/cm³ | 0.0986 lb/in³ |
| Melting point | 630 - 655°C | 1170 - 1210 °F |
The mechanical properties of aluminium / aluminum 3005-T14 alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 180 MPa | 26100 psi |
| Yield strength | 165 MPa | 23900 psi |
| Elongation | 7% | 7% |
| Elastic modulus | 69 GPa | 10000 ksi |
| Shear strength | 110 MPa | 16000 psi |
| Hardness, Brinell (@load 500 kg; thickness 10.0 mm) | 49 | 49 |
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Material | Aluminum Alloy |
| Grade | Al 3003 |
| Usage/Application | Construction |
| Brand | FHA |
| Length | 18 meter |
| Diameter | 500 mm |
| Shape | Round |
Aluminum / Aluminium alloys have high ductility and corrosion resistance. Aluminum / Aluminium 3003 alloy has moderate strength and good corrosion resistance. The strength of this alloy can be increased by cold working.
The following datasheet gives an overview of Aluminum / Aluminium 3003 alloy.
The following table shows the chemical composition of Aluminum / Aluminium 3003 alloy.
| Element | Content (%) |
|---|---|
| Aluminum, Al | 98.6 |
| Manganese, Mn | 1.2 |
| Copper, Cu | 0.12 |
The physical properties of the Aluminum / Aluminium 3003 alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.73 g/cm3 | 0.0939 lb/in3 |
| Melting point | 644°C | 1190°F |
The mechanical properties of the Aluminum / Aluminium 3003 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 130 MPa | 18855 psi |
| Yield strength | 125 MPa | 18130 psi |
| Shear strength | 83 MPa | 12039 psi |
| Fatigue strength | 55 MPa | 7977 psi |
| Elastic modulus | 70-80 GPa | 10153-11603 ksi |
| Poisson's ratio | 0.33 | 0.33 |
| Elongation | 10% | 10% |
| Hardness | 35 | 35 |
The thermal properties of the Aluminum / Aluminium 3003 alloy are given in the following table.
| Properties | Conditions | ||
|---|---|---|---|
| T (ºC) | Treatment | ||
| Thermal expansion co-efficient | 23.2 (10-6/ºC) | 20-100 | - |
| Thermal conductivity | 162 W/mK | 25 | H12 |
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Material | Aluminum Alloy |
| Grade | Al 2618 |
| Usage/Application | Construction |
| Brand | FHA |
| Surface Treatment | Hot Rolled |
| Length | 12 meter |
| Diameter | 350 mm |
Aluminium / Aluminum alloys have high ductility and corrosion resistance. At subzero temperatures, their strength can be increased. However, their strength can be reduced at high temperatures of about 200-250°C. Aluminium / Aluminum 2618 alloy is an age hardenable alloy containing magnesium and copper.
The datasheet given below gives details about Aluminium / Aluminum 2618 alloy.
The following table shows the chemical composition of Aluminium / Aluminum 2618 alloy.
| Element | Content (%) |
|---|---|
| Aluminium / Aluminum, Al | 93.7 |
| Copper, Cu | 2.30 |
| Magnesium, Mg | 1.60 |
| Iron, Fe | 1.1 |
| Nickel, Ni | 1.0 |
| Silicon, Si | 0.18 |
| Titanium, Ti | 0.07 |
The physical properties of the Aluminium / Aluminum 2618 alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.6-2.8 g/cm3 | 0.0939- 0.101 lb/in3 |
| Melting point | 510°C | 950°F |
The mechanical properties of the Aluminium / Aluminum 2618 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 440 MPa | 63817 psi |
| Yield strength | 370 MPa | 53664 psi |
| Shear strength | 260 MPa | 37709 psi |
| Fatigue strength | 125 MPa | 18130 psi |
| Elastic modulus | 70-80 GPa | 10153-11603 ksi |
| Poisson's ratio | 0.33 | 0.33 |
| Elongation | 10% | 10% |
The thermal properties of the Aluminium / Aluminum 2618 alloy are given in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal conductivity (@25°C/77°F) with T61 treatment |
146 W/mK | 1013 BTU in/hr.ft².°F |
Product Details:
| Minimum Order Quantity | 50 Kg |
| Diameter | 5 to 500mm Dia |
| Color | Silver |
| Material | Aluminum Alloy |
| Material Grade | Al 2024 |
| Shape | Round |
| Usage/Application | Construction |
| Brand | FHA |
| Length | 6 meter |
Aluminium / Aluminum alloys have strong corrosion resistance characteristics. These alloys are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F). An increase in strength takes place when these alloys are exposed at subzero temperatures and strength is lost when these alloys are exposed to high temperatures. Aluminium / Aluminum alloys are good low-temperature alloys.
The following datasheet provides an overview of the Aluminium / Aluminum 2024 alloy.
The chemical composition of the Aluminium / Aluminum 2024 alloy is outlined in the following table.
| Element | Content (%) |
|---|---|
| Aluminium / Aluminum, Al | 93.50 |
| Copper, Cu | 4.4 |
| Magnesium, Mg | 1.5 |
| Manganese, Mn | 0.6 |
The following table shows the physical properties of the Aluminium / Aluminum 2024 alloy.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.77 g/cm3 | 0.10007 lb/in3 |
| Melting point | 510°C | 950°F |
The mechanical properties of the Aluminium / Aluminum 2024 alloy are displayed in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Elastic modulus | 70-80 Gpa | 10152-11603 ksi |
| Poisson's ratio | 0.33 | 0.33 |
The thermal properties of the Aluminium / Aluminum 2024 alloy are given in the following table.
| Properties | Metric |
Imperial |
|---|---|---|
| Thermal expansion (@20-100ºC/68-212ºF) | 22.8 (10-6/ºC) | 12.71 µin/in°F |
| Thermal conductivity (@25ºC/77ºF) | 190 (W/mK) | 1319 BTU in/hr.ft².°F |
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Material | Aluminum Alloy |
| Usage/Application | Construction |
| Grade | Al 2014 |
| Size/Diameter | 4 inch |
| Single Piece Length | 6 meter |
| Shape | Round |
| End | Plain End |
| Brand | FHA |
Aluminium / Aluminum alloys have strong corrosion resistance characteristics and high electrical conductivity. The strength of these alloys increase at subzero temperatures and strength is lost when these alloys are exposed to high temperatures. Aluminium / Aluminum alloys are good low-temperature alloys and are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F).
The following datasheet provides an overview of Aluminium / Aluminum 2014 alloy.
The chemical composition of Aluminium / Aluminum 2014 alloy is outlined in the following table.
| Element | Content (%) |
|---|---|
| Aluminium / Aluminum, Al | 93.5 |
| Copper, Cu | 4.4 |
| Silicon, Si | 0.8 |
| Magnesium, Mg | 0.5 |
| Cromium, Cr |
0.1 (Max) |
| Manganese, Mn |
0.6 |
The following table shows the physical properties of Aluminium / Aluminum 2014 alloy.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.8 g/cm3 | 0.1018 lb/in3 |
| Melting point | 510°C | 950°F |
The mechanical properties of Aluminium / Aluminum 2014 alloy are displayed in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Elastic modulus | 70-80 GPa | 10152-11603 ksi |
| Poisson's ratio | 0.33 | 0.33 |
Product Details:
| Minimum Order Quantity | 50 Kg |
| Brand | FHA |
| Material | Aluminum Alloy |
| Grade | Al 2011 |
| Application | Construction |
| Single Piece Length | 3 meter |
| Thickness/Diameter | 500 mm |
| Shape | Round |
Aluminium alloy 2011 is a high mechanical strength alloy that machines exceptionally well. Often called a Free Machining Alloy or ‘FMA’ it is well suited to use in automatic lathes.
Machining at high speeds produces fine chips that are easily removed. The excellent machining characteristics allow the production of complex and detailed parts. In some circumstances Aluminium alloy 2011 can replace free machining brass without the need for alterations to tooling.
It has poor corrosion resistance, which means parts made from Aluminium alloy 2011tend to be anodised to provide additional surface protection.
When higher levels of corrosion resistance are required, 6262 T9 may be a suitable replacement.
| Element | % Present |
|---|---|
| Si | 0.4% |
| Fe | 0.7% |
| Cu | 5.0-6.0% |
| Pb | 0.2-0.6% |
| Bi | 0.2-0.6% |
| Zn | 0.3% |
| Other | 0.15% |
| Al | Balance |
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Grade | Al 1100 |
| Usage/Application | Construction |
| Brand | FHA |
| Material | Aluminium Alloy |
| Length | 12 meter |
| Diameter | 350 mm |
| Shape | Round |
Aluminium alloy 1050 is a popular grade of aluminium for general sheet metal work where moderate strength is required.
Aluminium alloy 1050 is known for its excellent corrosion resistance, high ductility and highly reflective finish.
Chemical composition for aluminium alloy 1050
| Element | % Present |
|---|---|
| Cu | 0-0.05 |
| Mg | 0-0.05% |
| Si | 0-0.25% |
| Fe | 0-0.4% |
| Mn | 0-0.05% |
| Zn | 0-0.07% |
| Ti | 0-0.05% |
| Al | Balance |
Mechanical properties for aluminium alloy 1050 H14
| BS EN 485-2:2008 Sheet 0.2mm to 6.00mm |
|
|---|---|
| Property | Value |
| Proof Stress | 85 Min MPa |
| Tensile Strength | 105 - 145 MPa |
| Hardness Brinell | 34 HB |
| Elongation A | 12 Min % |
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Material | Aluminum Alloy |
| Usage/Application | Construction |
| Brand | FHA |
| Grade | Al 1070 |
| Shape | Square |
| Length | 18 meter |
| Diameter | 350 mm |
Aluminium / aluminum is the second most widely used metal in the world today. It is a versatile metal that can be cast into any form. This lightweight metal can be welded, riveted, brazed, or resin bonded according to the requirement.
Aluminium / aluminum 1070 alloy is a wrought alloy type with good corrosion resistance. It is an excellent brazing alloy.
The following datasheet will provide more details about aluminium/ aluminum 1070 alloy.
The following table shows the chemical composition of aluminium/aluminum 1070 alloy.
| Element | Content (%) |
|---|---|
| Aluminum, Al | ≥ 99.7 |
| Iron, Fe | ≤ 0.25 |
| Silicon, Si | ≤ 0.20 |
| Zinc, Zn | ≤ 0.040 |
| Vanadium, V | ≤ 0.050 |
| Copper, Cu | ≤ 0.040 |
| Titanium, Ti | ≤ 0.030 |
| Magnesium, Mg | ≤ 0.030 |
| Manganese, Mn | ≤ 0.030 |
| Other (each) | ≤ 0.030 |
The physical properties of aluminium/aluminum 1070 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.70 g/cm3 | 0.0975 lb/in3 |
The mechanical properties of aluminium / aluminum 1070-O alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 95 MPa | 13778 psi |
Aluminium / aluminum 1070 alloy is chiefly used in the following areas:
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Material | Nickel Aloy |
| Grade | A-286 |
| Is It Anodised | Anodised |
| Usage/Application | Construction |
| Brand | FHA |
| Size | 500 mm |
The management team are amongst the most experienced professionals in the market. Supported by professional metallurgists and technicians, not only provide access to the largest range of high-tec metals in Europe, but also access to the broadest range of expertise.
The unique combination of access to stock, expertise and rapid delivery reduces lead times and can eliminate costly production delays.
Range of materials includes:
A-286 is an age-hardenable iron base superalloy for applications requiring high strength from -320°F up to 1000°F long time, 1300-1500°F short time. Oxidation resistance is high for continuous service to 1500°F, intermittent to 1800°F. Aqueous corrosion resistance is comparable to 316/L stainless.
Typical Applications for the A-286 include:
Composition of A-286
|
Chemistry, % |
Min |
Max |
|
Chromium |
13.50 |
16.00 |
|
Nickel |
24.00 |
27.00 |
|
Molybdenum |
1.00 |
1.50 |
|
Cobalt |
- |
1.00 |
|
Vanadium |
0.10 |
0.50 |
|
Aluminum |
- |
0.35 |
|
Titanium |
1.90 |
2.35 |
|
Boron |
0.003 |
0.010 |
|
Carbon |
- |
0.08 |
|
Iron |
remainder |
|
|
Manganese |
- |
2.00 |
|
Silicon |
- |
1.00 |
|
Phosphorus |
- |
0.025 |
|
Sulfur |
- |
0.025 |
Product Details:
| Minimum Order Quantity | 50 Kg |
| Grade | Al 7039 D74S 74530 |
| Shape | Block |
| Color | Silver |
| Material | Aluminum Alloys |
| Brand | FHA |
| Weight | 500 kg |
| Usage/Application | Construction |
| Size | 500 mm |
Aluminium / aluminum is one of the lightest available commercial metals with a density approximately one-third that of steel or copper. It can be easily fabricated into many forms such as foil, sheets, rod, tube, geometric shapes, and wire.
Aluminium / aluminum 7039 alloy is a heat treatable wrought alloy. The following datasheet will provide more details about aluminium / aluminum 7039 alloy.
The following table shows the chemical composition of aluminium / aluminum 7039 alloy.
| Element | Content (%) |
|---|---|
| Zinc, Zn | 3.5 - 4.5 |
| Magnesium, Mg | 2.3 - 3.3 |
| Silicon, Si | 0.3 max |
| Iron, Fe | 0.4 max |
| Chromium, Cr | 0.15 - 0.25 |
| Manganese, Mn | 0.1 - 0.4 |
| Copper, Cu | 0.1 max |
| Titanium, Ti | 0.1 max |
| Remainder (total) | 0.15 max |
| Aluminum, Al | Remainder |
The physical properties of aluminium / aluminum 7039 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.74 g/cm³ | 0.0990 lb/in³ |
| Melting point | 482-638°C | 900-1180 °F |
The mechanical properties of aluminium / aluminum 7039-T64 alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength (@diameter 12.7 mm/0.500 in) | 450 MPa | 65300 psi |
| Yield strength (@diameter 12.7 mm/0.500 in) | 380 MPa | 55100 psi |
| Elongation at break (@diameter 12.7 mm/0.500 in) | 13% | 13% |
| Elastic modulus | 69.6 GPa | 10100 ksi |
| Shear strength | 255 MPa | 37000 psi |
| Hardness, Brinell (@load 500 kg; thickness 10.0 mm/1100 lb;0.394 in) | 133 | 133 |
| Hardness, Knoop (converted from Brinell hardness value) | 167 | 167 |
| Hardness, Rockwell A (converted from Brinell hardness value) | 50 | 50 |
| Hardness, Rockwell B (converted from brinell hardness value) | 81 | 81 |
| Hardness, Vickers (converted from Brinell hardness value) | 153 | 153 |